使激动
发表于 2025-3-23 11:59:39
http://reply.papertrans.cn/24/2393/239240/239240_11.png
Virtues
发表于 2025-3-23 17:21:14
http://reply.papertrans.cn/24/2393/239240/239240_12.png
食物
发表于 2025-3-23 18:34:15
Begriffliche Klärungen und Forschungsstandated results are obtained with the approach described in sections 5.3.1 and 5.4.3. The good agreement between the results confirm the validity of the described approach. Other simulated results will be presented also in chapter 7 of this book, in order to highlight different peculiar behaviours.
职业拳击手
发表于 2025-3-24 01:36:51
iffness are reduced when the crack is open. These stiffness are 1X periodical when the crack is breathing and cause parametric excitation when torsion or axial loads are applied. Moreover also coupling between shear loads and torsion and vice versa between torsion loads and bending behaviour exists.
不安
发表于 2025-3-24 03:53:56
http://reply.papertrans.cn/24/2393/239240/239240_15.png
Toxoid-Vaccines
发表于 2025-3-24 10:04:46
Diskussion und Schlussfolgerungenpagate from some small imperfections on the surface of the body or inside of the material and it is most likely to appear in correspondence of high stress concentration. For example, figure 1.1 shows a crack developed in the stiffening plate of a generator casing.
记忆法
发表于 2025-3-24 10:45:29
http://reply.papertrans.cn/24/2393/239240/239240_17.png
bonnet
发表于 2025-3-24 18:11:40
http://reply.papertrans.cn/24/2393/239240/239240_18.png
深渊
发表于 2025-3-24 20:11:15
Nicolò Bachschmid,Paolo Pennacchi,Ezio TanziCracks are described an analysed from the practical point of view in industry.Modeling facilitates the computational analysis of cracks.Many practical examples illustrate the basic concept
吝啬性
发表于 2025-3-25 03:11:34
http://reply.papertrans.cn/24/2393/239240/239240_20.png