向前变椭圆
发表于 2025-3-25 03:39:54
http://reply.papertrans.cn/24/2382/238171/238171_21.png
新娘
发表于 2025-3-25 11:23:13
Electrodeposition of Metallic Precursors,eposition (electrodeposition). Only a brief overview will be given, and the reader is referred to Bard and Faulkner (Electrochemical methods, fundamentals and applications, 2nd edn. Wiley, New York, 2001) for further details.
特征
发表于 2025-3-25 14:48:28
http://reply.papertrans.cn/24/2382/238171/238171_23.png
BRACE
发表于 2025-3-25 18:40:46
http://reply.papertrans.cn/24/2382/238171/238171_24.png
蜿蜒而流
发表于 2025-3-25 22:42:24
Conclusions and Recommendations for Further Studies,s of Cu, Sn and Zn. The development of an electrodeposition route for ‘stacked elemental layer’ (SEL) precursor was described in .. The route allows relatively good control of precursor composition, and compositional uniformity was achieved by the use of a rotating disc electrode system. Mo|Cu|Sn|Cu
Noctambulant
发表于 2025-3-26 00:46:13
2190-5053 onship between structure, phase composition and optoelectronJonathan Scragg documents his work on a very promising material suitable for use in solar cells. Copper Zinc Tin Sulfide (CZTS) is a low cost, earth-abundant material suitable for large scale deployment in photovoltaics. Jonathan pioneered
Omnipotent
发表于 2025-3-26 05:55:12
Book 2011ed with techniques such as XRD, EDX and Raman – reveal the complex relationships between composition, processing and photovoltaic performance. This exceptional thesis contributes to the development of clean, sustainable and alternative sources of energy
解脱
发表于 2025-3-26 11:29:35
http://reply.papertrans.cn/24/2382/238171/238171_28.png
patella
发表于 2025-3-26 12:51:34
Conclusions and Recommendations for Further Studies,h was described in .. The use of rapid thermal processing has enabled some time-resolved studies of film formation to be carried out, and in . a model was proposed for film formation when fast heating rates are employed.
屈尊
发表于 2025-3-26 18:13:00
Book 2011bundant material suitable for large scale deployment in photovoltaics. Jonathan pioneered and optimized a low cost route to this material involving electroplating of the three metals concerned, followed by rapid thermal processing (RTP) in sulfur vapour. His beautifully detailed RTP studies – combin