unstable-angina 发表于 2025-3-28 17:31:07
,Vom Wärmeübertragungskoeffizienten,. The data is taken from previous work from research. The experiment is carried out to collect the response data of lateral acceleration and the head movements of the occupants. This research also presents the model developed in MATLAB by implementing experimental data as parameter into two differen凶兆 发表于 2025-3-28 21:04:52
,Die Leistungen der Sinne. II. Hälfte,e experimental results reveal that the energy harvester delivered a maximum output voltage of 1.27 V at a maximum excitation frequency of 16.66 Hz using a spring stiffness of 86.74 N/m. Furthermore, the maximum output voltage produced by spring of stiffness 114.26 N/m is equal to 2.01 V at a frequenPcos971 发表于 2025-3-28 22:57:36
https://doi.org/10.1007/978-3-662-36237-2 heatsink to solve the problem of charging a cellular phone on a motorcycle. The process of developing this system requires control over the voltage capacity as well as the ability to monitor it online through the Internet of Things system. The development of this system revealed that large temperat可忽略 发表于 2025-3-29 05:39:28
https://doi.org/10.1007/978-981-19-3923-5Automation; Control algorithm; Intelligent Control; Manufacturing; Measurement; Robotics; Sensor试验 发表于 2025-3-29 08:17:28
http://reply.papertrans.cn/24/2375/237446/237446_45.pngIntervention 发表于 2025-3-29 12:55:56
http://reply.papertrans.cn/24/2375/237446/237446_46.png道学气 发表于 2025-3-29 15:54:08
Lecture Notes in Electrical Engineeringhttp://image.papertrans.cn/c/image/237446.jpgaffect 发表于 2025-3-29 20:35:56
Control, Instrumentation and Mechatronics: Theory and Practice978-981-19-3923-5Series ISSN 1876-1100 Series E-ISSN 1876-1119安抚 发表于 2025-3-30 01:38:54
http://reply.papertrans.cn/24/2375/237446/237446_49.png外露 发表于 2025-3-30 05:19:34
,Der Chefarzt als Colonnenführer,Vehicle (UCAV) configuration with 53° blunt leading-edge sweep are presented. The experiments were carried out in Universiti Teknologi Malaysia Low-Speed wind Tunnel (UTM-LST), and the computational work was done using Ansys Fluent. The flow visualisation for experimental and computational was perfo