Precursor
发表于 2025-3-23 12:13:13
http://reply.papertrans.cn/24/2364/236329/236329_11.png
Adornment
发表于 2025-3-23 15:53:23
http://reply.papertrans.cn/24/2364/236329/236329_12.png
URN
发表于 2025-3-23 21:16:24
Das An-sich-Seiende und sein Sinn bei Kantis particularly challenging. By using a first-level approximation model, where an insect impact can be approximated as a water droplet impact, information can be leveraged toward understanding insect residue accretion. However, an insect consists of an exoskeleton covering hemolymph, which is signif
backdrop
发表于 2025-3-23 22:53:03
http://reply.papertrans.cn/24/2364/236329/236329_14.png
patriot
发表于 2025-3-24 04:23:20
http://reply.papertrans.cn/24/2364/236329/236329_15.png
MAUVE
发表于 2025-3-24 08:03:06
https://doi.org/10.1007/978-3-662-62332-9areas such as wings or vertical stabilizers. Development of such surfaces is extremely challenging because of stringent requirements on resistance to aircraft fluids and to environmental conditions such as ultraviolet radiation, rain, and sand erosion..For assessment of insect-mitigating properties
faddish
发表于 2025-3-24 11:08:39
https://doi.org/10.1007/978-3-662-62332-9rationale for existing fouling management is provided. Fouling management in even benign environments is difficult because commercial approaches use broad-spectrum stable biocides with non-target effects on humans, environmental health, and food safety. These historic approaches target death as the
过于光泽
发表于 2025-3-24 16:30:19
https://doi.org/10.1007/978-3-662-62332-9polymers now widely employed as substitutes for tributyltin- and copper-based ship bottom paints. These have been found to be too soft for harsh conditions, especially during abrasion, but do serve for useful periods in commercial and military circumstances where abrasion is not frequent. This chapt
舔食
发表于 2025-3-24 21:14:51
http://reply.papertrans.cn/24/2364/236329/236329_19.png
是贪求
发表于 2025-3-25 02:39:22
https://doi.org/10.1007/978-3-662-60705-3aximum ice adhesion strength to anti-contamination coatings allowing passive ice removal by wind or vibration. Modeling ice as a cantilever beam on a coating surface in a wind stream indicates that the benchmark value is dependent on the assumed shape of the ice that needs to be removed.