使饥饿
发表于 2025-3-23 10:15:58
Endogenous Boundary Value Problems,ncy, very filigree fasteners were developed especially for façade constructions. These fasteners are ranging from button and countersunk fittings, undercut anchors and clamped fittings to adhesive joints (Tibolt, 2015).
LEVY
发表于 2025-3-23 16:49:08
Wilhelm A. Zuelzer,Sreenivasulu Metikalauctural behaviour of rubber-like materials especially under volumetric loading. Effects such as the cavitation effect, isochoric Mullins effect and effects under volumetric cyclic loading will be modelled with the developed material models.
diathermy
发表于 2025-3-23 21:56:57
http://reply.papertrans.cn/24/2360/235902/235902_13.png
Ondines-curse
发表于 2025-3-23 22:44:21
Elastomers and their Mechanical Behaviour,of this chapter is to understand the behaviour of polymers and their classical material modelling. The main features of material modelling will be used later (Chap. 5) to develop novel improved material models.
Sinus-Node
发表于 2025-3-24 05:02:37
Development of Failure Criteria for Poro-Hyperelastic Materials,introduced and tested for their applicability to approximate the experimentally determined failure stretches of TSSA (see Section 4). Additionally, rubber-like materials exhibit cavitation failure under triaxial loading, which means that there is an effective stress softening of the hydrostatic pressure . with increasing volume.
阴谋
发表于 2025-3-24 10:14:48
http://reply.papertrans.cn/24/2360/235902/235902_16.png
configuration
发表于 2025-3-24 14:31:08
Introduction,ncy, very filigree fasteners were developed especially for façade constructions. These fasteners are ranging from button and countersunk fittings, undercut anchors and clamped fittings to adhesive joints (Tibolt, 2015).
acheon
发表于 2025-3-24 16:17:31
http://reply.papertrans.cn/24/2360/235902/235902_18.png
萤火虫
发表于 2025-3-24 21:33:44
Conclusion and Outlook,e been presented and validated for their constitutive description. Furthermore, models for the description of failure in three-dimensional stretch-space have been presented (Chap. 6), which have been transformed into a global safety concept in Chap. 7 dedicated to structural engineers.
Circumscribe
发表于 2025-3-25 00:17:42
Charcot Arthropathy of the Shoulder,of this chapter is to understand the behaviour of polymers and their classical material modelling. The main features of material modelling will be used later (Chap. 5) to develop novel improved material models.