chance
发表于 2025-3-25 06:08:18
Lecture Notes in Computer Scienceibration signal which are generated by a gearbox in a healthy condition. The PCs are optimized to represent hidden characteristics of the healthy data as experienced over different operating conditions. The auto-encoder may thus be used to detect signal distortions (discrepancies) in a novel signal,
Endoscope
发表于 2025-3-25 09:11:14
http://reply.papertrans.cn/24/2353/235203/235203_22.png
abstemious
发表于 2025-3-25 14:35:44
Marko Horvat,Gordan Gledec,Nikola Bogunovićty of components in systems, parametric models have been developed that describe the rate at which damage accumulates, based either on empirical or theoretical models of the physics of the damage process. These models can inform the reliability analyst about observability of the damage process, and
态度暖昧
发表于 2025-3-25 18:24:08
Grzegorz J. Nalepa,Weronika T. Furmańskacylindrical pipe is included in the transfer function equation at the closed valve in a reservoir-pipe-valve system. The impedance diagram of this system with cylindrical leak is plotted and analyzed; the influence of the . on leak locations is studied. The numerical study relying on impedance metho
intercede
发表于 2025-3-25 22:51:09
Ngoc Thanh Nguyen,Ryszard Kowalczyktor torque variation in addition to the fluctuation of meshing stiffness due to the variation of input rotational speed. Then, the dynamic response is solved using implicit type numerical integration technique Newmark-.. A parameter study is made on spur gear powered by four strokes four cylinders d
泥沼
发表于 2025-3-26 01:13:38
http://reply.papertrans.cn/24/2353/235203/235203_26.png
Gnrh670
发表于 2025-3-26 05:51:47
Lecture Notes in Computer ScienceMRAS), its structure consists of a reference model that doesn’t involve the variable being estimated and an adjustable model that does. The error between these two models is proportional to the error in the estimation of the unknown variable. This value is used to improve the estimation of the adapt
Charade
发表于 2025-3-26 11:58:48
Distributed Learning with Data Reductiond undesired (manufacture errors) deviations in the tooth profile. The model uses a hybrid method for the calculation of meshing forces, which combines FE analysis and analytical formulation, so that it enables a very straightforward implementation of the tooth profile deviations. The model approach
DALLY
发表于 2025-3-26 14:46:58
http://reply.papertrans.cn/24/2353/235203/235203_29.png
LATE
发表于 2025-3-26 17:21:18
https://doi.org/10.1007/978-3-642-28768-8Mechatronic Machinery; Modelling of Dynamics and Fault in Machinery; Monitoring and Diagnostic Systems