PANT
发表于 2025-3-23 10:29:23
http://reply.papertrans.cn/24/2353/235202/235202_11.png
motivate
发表于 2025-3-23 13:59:56
http://reply.papertrans.cn/24/2353/235202/235202_12.png
背心
发表于 2025-3-23 19:53:01
Frequency Domain Analysis for Nonlinear Systems,ract some features belonging to the fault. This means that only the output measuring signal is considered in detecting faults and the effects of the input excitation, which is also critical in many engineering applications, has not been taking into account.
两种语言
发表于 2025-3-24 01:30:20
Development of Advanced Signal Processing Based Fault Diagnosis,on path between different parts is studied with the aid of advanced signal processing techniques. These methods are all univariate signal processing to analyse only one sensor signal. As mentioned in Chapter 2, a wind turbine (WTB) has a multi-stage gearboxes.
切掉
发表于 2025-3-24 05:16:35
http://reply.papertrans.cn/24/2353/235202/235202_15.png
枯燥
发表于 2025-3-24 09:52:16
http://reply.papertrans.cn/24/2353/235202/235202_16.png
转换
发表于 2025-3-24 14:27:37
Abstracting Context in Event-Based SoftwareA variety of fault diagnosis technologies have been developed for detecting faults in gears, depending on the sensor types utilized or the information about the physical variables collected (for example, temperature, oil sample, acoustics and vibration, etc.).
misshapen
发表于 2025-3-24 16:37:18
http://reply.papertrans.cn/24/2353/235202/235202_18.png
刺激
发表于 2025-3-24 21:01:35
Introduction,Condition Monitoring (CM) and Fault detection and diagnosis (FDD) help to ensure the reliability and low-cost operation of industrial facilities in engineering systems. CM can provide early detection of machine faults so that appropriate actions can be taken before that fault causes breakdown and, possibly, a catastrophic failure .
烤架
发表于 2025-3-25 00:05:30
Vibration Signal-Based Analysis for Gear Faults,A variety of fault diagnosis technologies have been developed for detecting faults in gears, depending on the sensor types utilized or the information about the physical variables collected (for example, temperature, oil sample, acoustics and vibration, etc.).