meritorious
发表于 2025-3-23 10:16:25
Introduction,e and others, in the vicinity of sudden changes in geometry or loading, where the distribution of deformations is no longer linear. These regions are often referred to as Regions-B and D-regions, respectively—the letter B comes from Bernoulli and the letter D comes from Discontinuity.
Harbor
发表于 2025-3-23 17:30:46
,The Plasticity Model of Concrete Damage—CDPM,e rheology of the material itself associated with the interaction of concrete with steel (reinforced concrete) contribute to lend a particular complexity that are not frequent in other construction materials.
不断的变动
发表于 2025-3-23 20:07:10
Bottle-Shaped Isolated Struts Concrete Deteriorated,orcement configurations, in which the compressive stresses resulting from the load applied through rigid plates installed at the top and base of the elements were able to disperse creating transverse tensile stresses within the samples.
英寸
发表于 2025-3-23 22:28:56
Conclusions and Future Recommendations,rough numerical modelling with the FEM model. In general, the results obtained showed that the CDPM is a model of plasticity with damage with the potential to represent the load-bearing mechanisms of isolated concrete bottle-shaped struts a range of several stress levels to which these elements may be subjected in the panels investigated.
llibretto
发表于 2025-3-24 04:39:17
http://reply.papertrans.cn/24/2352/235134/235134_15.png
终点
发表于 2025-3-24 07:23:30
https://doi.org/10.1057/9780230274105e and others, in the vicinity of sudden changes in geometry or loading, where the distribution of deformations is no longer linear. These regions are often referred to as Regions-B and D-regions, respectively—the letter B comes from Bernoulli and the letter D comes from Discontinuity.
fatty-streak
发表于 2025-3-24 13:33:32
http://reply.papertrans.cn/24/2352/235134/235134_17.png
离开
发表于 2025-3-24 15:49:14
https://doi.org/10.1057/9780230274105orcement configurations, in which the compressive stresses resulting from the load applied through rigid plates installed at the top and base of the elements were able to disperse creating transverse tensile stresses within the samples.
exophthalmos
发表于 2025-3-24 19:36:21
The RAS Structural Decomposition Approachrough numerical modelling with the FEM model. In general, the results obtained showed that the CDPM is a model of plasticity with damage with the potential to represent the load-bearing mechanisms of isolated concrete bottle-shaped struts a range of several stress levels to which these elements may be subjected in the panels investigated.
六个才偏离
发表于 2025-3-24 23:37:05
http://reply.papertrans.cn/24/2352/235134/235134_20.png