Ingenuity
发表于 2025-3-28 15:15:30
Errors in Design and Detailing a drawing or specification including omissions and ambiguities. A study by Building Research Advisory Service, UK, was carried out for analysing the reasons for causes of failures in buildings, which indicate that 58% of all failures are attributed to faulty design; 35% defects are attributed to fa
organism
发表于 2025-3-28 22:34:54
Achieving Quality in Concrete Construction durable structure. Quality of concrete construction depends on many factors. From the selection of construction materials to the curing of the structural member, each and every step must be carried out to maintain the quality requirement of the project. Any deviation from the required quality may r
JAUNT
发表于 2025-3-29 00:32:21
http://reply.papertrans.cn/24/2352/235126/235126_43.png
Nomadic
发表于 2025-3-29 05:02:17
http://reply.papertrans.cn/24/2352/235126/235126_44.png
resuscitation
发表于 2025-3-29 09:27:47
https://doi.org/10.1007/978-1-4419-1072-1gates, synthetic aggregates, and recycled concrete aggregates (RCA) and their influence on concrete produced. This chapter also addresses mixing and curing water requirements, and types and uses of admixtures; about ten types of admixtures are discussed.
COMMA
发表于 2025-3-29 14:25:33
http://reply.papertrans.cn/24/2352/235126/235126_46.png
Ambiguous
发表于 2025-3-29 17:50:32
http://reply.papertrans.cn/24/2352/235126/235126_47.png
抗生素
发表于 2025-3-29 20:02:44
Instruments of Trade and Industrial Policys. The exposure conditions discussed are freezing and thawing, wetting and drying, leaching, abrasion, overloading, settlement, fire resistance, and restraint against movement. Various types of concrete joints and sealants, their failures, and remedies are also covered in this chapter.