保守党
发表于 2025-3-23 11:21:31
https://doi.org/10.1007/978-94-009-3277-7 this particular chapter, is the major influence of certain nontrivial aspects of the prebuckling solution on predictions of bifurcation buckling loads. Whereas the emphasis in the last chapter was on nonlinear collapse rather than bifurcation buckling, the emphasis here is on bifurcation buckling w
yohimbine
发表于 2025-3-23 13:56:24
Ansys Solution and Postprocessing, rings at the edges. Figure 22, which reveals the sensitivity of critical axial load to initial imperfections in cylindrical shells of various wall constructions, seems to indicate that ring-stiffened cylinders are less sensitive than the other types for which test results are shown. In Figs. 35 and
OTHER
发表于 2025-3-23 21:27:44
http://reply.papertrans.cn/24/2346/234584/234584_13.png
Canopy
发表于 2025-3-23 22:12:49
http://reply.papertrans.cn/24/2346/234584/234584_14.png
sacrum
发表于 2025-3-24 03:24:26
Ansys Solution and Postprocessing,ure are modeled with use of thin-shell theory and other parts with use of isoparametric solid elements of revolution. Bushnell has written a computer program called BOSOR6 for the stress, buckling, and vibration analysis of these configurations. Such a computer program is useful for the analys
轻快走过
发表于 2025-3-24 06:49:46
http://reply.papertrans.cn/24/2346/234584/234584_16.png
Palpable
发表于 2025-3-24 11:12:04
Nonlinear collapse,onlinear collapse (“snap-through”) or to bifurcation buckling. The purpose of this section is to present many examples in which the failure mode is nonlinear collapse. Examples are given of axisymmetric collapse of elastic-plastic-creeping monocoque cylinders under axial compression and ring-stiffen
nurture
发表于 2025-3-24 15:50:25
http://reply.papertrans.cn/24/2346/234584/234584_18.png
匍匐前进
发表于 2025-3-24 21:27:37
http://reply.papertrans.cn/24/2346/234584/234584_19.png
观察
发表于 2025-3-24 23:49:37
Buckling of prismatic shells and panels,the coordinate directions, generally called the axial direction. In this chapter a method will be described in which a computer program for the analysis of shells of revolution can be used to predict buckling of prismatic shells and panels. Results will be given of convergence studies applied to cyl