brother
发表于 2025-3-27 00:39:55
A Neural Network Technique for Remeshing of Bone Microstructure,bone quality. Recent improvements in 3D imaging technology, among them development of micro-CT and micro-MRI scanners, allow in-vivo 3D high-resolution scanning and reconstruction of large specimens or even whole bone models. Thus, the tendency today is to evaluate bone features using 3D assessment
抓住他投降
发表于 2025-3-27 01:19:13
Using the Taguchi Method to Obtain More Finesse to the Biodegradable Fibers,ber of spinning experiments to find optimal processing conditions and to maximize the quality of the fibers (thickness, strength, and smoothness). The optimization was performed in two parts. At first, the melt spinning process was optimized considering the drawing that followed and at second step t
报复
发表于 2025-3-27 08:59:11
Numerical Modeling in the Design and Evaluation of Scaffolds for Orthopaedics Applications,finite element analysis and genetic algorithm maybe applied to predict the mechanical performance of novel scaffolds, with a honeycomb-like pattern, a fully interconnected channel network, and controllable porosity fabricated in layers of directionally aligned microfibers deposited using a computer-
不成比例
发表于 2025-3-27 10:06:44
Structural and Vascular Analysis of Tissue Engineering Scaffolds, Part 1: Numerical Fluid Analysis,ring. These scaffolds should be biocompatible, biodegradable, with appropriate porosity, pore structure, and pore distribution on top of presenting both surface and structural compatibility. This chapter presents the state-of-the-art in tissue engineering and scaffold design using numerical fluid an
Mirage
发表于 2025-3-27 15:24:06
http://reply.papertrans.cn/24/2345/234454/234454_35.png
verdict
发表于 2025-3-27 18:21:58
http://reply.papertrans.cn/24/2345/234454/234454_36.png
MOCK
发表于 2025-3-27 22:51:04
Recent Advances in 3D Printing of Tissue Engineering Scaffolds,nts based on optimized models. In this chapter, three-dimensional printing technology is described, and several limitations in the current direct printing approach are discussed. This chapter also describes indirect three-dimensional printing protocol to overcome convergent demands with a traditiona
Anal-Canal
发表于 2025-3-28 03:24:01
,Graft–Artery Junctions: Design Optimization and CAD Development,e geometry, materials of appropriate characteristics, and manufacturing technique capable of constructing prosthesis in a cost-effective manner. In this chapter, all engineering aspects related to the design and optimization of an artificial graft are presented and discussed. These aspects include C
大炮
发表于 2025-3-28 10:05:16
Projection Printing of 3-Dimensional Tissue Scaffolds,werful tool in studying progenitor cell behavior and differentiation under biomimetic, three-dimensional (3D) culture conditions. The development of freeform fabrication technology has become a promising tool for the manufacturing of biological scaffolds for tissue regeneration and stem cell enginee
Memorial
发表于 2025-3-28 14:10:33
Laser Sintering for the Fabrication of Tissue Engineering Scaffolds,a physical part. In theory, all powdered materials are suitable for sintering; however, only few have been tested successfully. For tissue engineering (TE) applications of this rapid prototyping technology it is an advantage that no toxic solvents or binders are necessary. This chapter reviews the d