antecedence
发表于 2025-3-23 10:49:19
http://reply.papertrans.cn/24/2334/233387/233387_11.png
Foreshadow
发表于 2025-3-23 16:14:49
Prabhanjan Ananth,Xiong Fan,Elaine ShiWire EDM is mainly used for cutting hard metals. EDM is a two-axis Machining process.
Instrumental
发表于 2025-3-23 18:33:32
https://doi.org/10.1007/978-3-030-34578-5Area Turning is used to remove excess material from stock. Area Turning is a two-axis machining process.
事情
发表于 2025-3-23 23:30:45
http://reply.papertrans.cn/24/2334/233387/233387_14.png
忙碌
发表于 2025-3-24 02:52:15
Qian Guo,Thomas Johansson,Jing YangIn this tutorial, the following step-by-step guide of five axis Surface milling of intricate part will be covered.
使显得不重要
发表于 2025-3-24 06:58:50
Engraving Tutorial,Engraving is used to inscribe (a design, writing, character, etc.) onto a block, plate or other surface by carving, etching with acid or other process.
irradicable
发表于 2025-3-24 13:13:48
http://reply.papertrans.cn/24/2334/233387/233387_17.png
角斗士
发表于 2025-3-24 16:48:32
Volume Rough Milling Operation,The Volume Rough milling operation is used when excess materials have to be removed from the Part/Workpiece surface as will be demonstrated in this Volume Rough milling tutorial.
CUMB
发表于 2025-3-24 23:04:09
http://reply.papertrans.cn/24/2334/233387/233387_19.png
自然环境
发表于 2025-3-25 02:09:31
http://reply.papertrans.cn/24/2334/233387/233387_20.png