outer-ear
发表于 2025-3-23 09:51:14
Computer-Aided Grid Strain Analysis in Fibre Reinforced Thermoplastic Sheet Formingt laminated sheets into hemispherical domes. The importance of using such a macroscopic analysis to highlight fibre buckling, sheet thinning/thickening, gross wrinkling, and matrix squeezing has been discussed.
无能力之人
发表于 2025-3-23 15:17:07
http://reply.papertrans.cn/24/2334/233304/233304_12.png
沉着
发表于 2025-3-23 21:16:34
Schedules and performance criteria,d microstructure. In addition, an automation scheme for the manufacture of 3- D braids has been developed. The machine is capable of fabricating braids with a wide variety of architectures, including axial reinforcement yarns. Preform geometric characteristics show close agreement with those given by model predictions.
Immortal
发表于 2025-3-23 23:37:33
http://reply.papertrans.cn/24/2334/233304/233304_14.png
腐蚀
发表于 2025-3-24 05:50:49
Tissue Engineering and the Vascular Systemf the stress distribution in a whole femur and further to arrive at a general basis for some applications of ceramic bone implants. The FEM model has been used to study the influence of material parameters and calcium phosphate implants on the stress distribution of a cow femur.
夸张
发表于 2025-3-24 07:15:31
Signal Processing and Digital Filteringexperimental results for its validation, as a contribution to the study of the mechanism of delamination, occurring during laminated CFRP composite cutting, and to the avoidance of this structural damage.
delegate
发表于 2025-3-24 10:46:01
Contribution to the Study of the Delamination of Carbon Fibre Reinforced Plastic (CFRP) Laminated Coexperimental results for its validation, as a contribution to the study of the mechanism of delamination, occurring during laminated CFRP composite cutting, and to the avoidance of this structural damage.
不要不诚实
发表于 2025-3-24 15:55:36
Design and Automated Fabrication of 3-D Braided Preforms for Advanced Structural Compositesd microstructure. In addition, an automation scheme for the manufacture of 3- D braids has been developed. The machine is capable of fabricating braids with a wide variety of architectures, including axial reinforcement yarns. Preform geometric characteristics show close agreement with those given by model predictions.
草本植物
发表于 2025-3-24 19:09:45
Incremental Deformation Studies During Matched-Die-Forming of Continuous Carbon-Fibre Reinforced Pole pronounced if the viscosity of the interlayer and, consequently, the shear stress level increase. This leads to a transfer of compressive stresses into the fibre rich layers. The fibres relieve these stresses by geometrical deformations which appear in the form of in-plane waviness and out-of-plane buckling.
Fretful
发表于 2025-3-25 00:18:58
http://reply.papertrans.cn/24/2334/233304/233304_20.png