Perceive
发表于 2025-3-23 12:57:28
Gaussian Process Based Photometric Stereo,ance. Photometric stereo is one technology that could potentially handle this problem by inversely modeling the non-Lambertian reflectance, but it generally requires numerous lights. To minimize the light number, this paper proposes the Gaussian Process based photometric stereo, which utilizes the G
integral
发表于 2025-3-23 14:51:52
http://reply.papertrans.cn/24/2333/233242/233242_12.png
课程
发表于 2025-3-23 21:41:25
http://reply.papertrans.cn/24/2333/233242/233242_13.png
diabetes
发表于 2025-3-24 01:44:13
http://reply.papertrans.cn/24/2333/233242/233242_14.png
领带
发表于 2025-3-24 02:34:30
Seismic Vulnerability Analysis of Symbiosis of New-Built Structure and Historic Heritage Architectutructure built under it to cooperate with the protective comprehensive renovation project. In order to determine the seismic performance of this new and old symbiotic structure, this paper took the peak ground acceleration (PGA) as the ground motion intensity measure (IM), the maximum inter-story di
歌唱队
发表于 2025-3-24 08:14:53
Optimization of Volumetric Fracturing Parameters for Deep Horizontal Wells Based on Integrated Geolfracturing parameters will lead to insufficient reservoir stimulation, that is, low oil productivity and fast decline rate. In order to optimize the volumetric fracturing parameters in Taipei block, this paper established a fine geological model. Meanwhile, this paper also simulated the related frac
Antarctic
发表于 2025-3-24 14:25:46
Effects of Loading Direction and Strain Rate on Mechanical Properties and Failure Modes of Teak,stress–strain curve of teak with strong impact resistance was investigated by compressive experimenting in the axial, tangential and radial directions under wide strain rates from 10. to 10.. The results show that their responses behaves similarly and presents a three-stage characteristics in the sa
Compass
发表于 2025-3-24 18:54:19
Experimental and Finite Element Study of RC Beams Shear Strengthened with Prestressed NSM CFRP,ection, this paper proposed a method of shear strengthening with prestressed near surface mounted CFRP. Four RC T-beams shear strengthened with prestressed NSM CFRP were tested. The mechanical behavior and failure mode of each specimen were investigated, and the variation law of shear cracks was stu
杂色
发表于 2025-3-24 20:50:13
http://reply.papertrans.cn/24/2333/233242/233242_19.png
Paleontology
发表于 2025-3-24 23:13:26
http://reply.papertrans.cn/24/2333/233242/233242_20.png