MIRTH
发表于 2025-3-25 05:21:15
Confirmation of Sympathy in Industryd cylinders is determined by FEA method using CAE software. Critical speeds are defined, resulting in pinching of rubber elastic element that depends on properties of the used material. Critical rotational speed increases with increase elastic modulus of the elastic element of 4 to 8 MPa and decreas
外露
发表于 2025-3-25 10:55:51
Sympathy Innovation for Phronesision, quality function, social support function, rescue function and innovation development function are some of them. These functions (supplier benefits), influence company future collaboration with key suppliers and consequently influences co-creation. Research results identified that quality, soci
寻找
发表于 2025-3-25 12:49:51
http://reply.papertrans.cn/24/2333/233235/233235_23.png
1FAWN
发表于 2025-3-25 16:24:20
Residual Fatigue Life Estimation of Structural Components Under Mode-I and Mixed Mode Crack Problemse element alternating, weight function, photo elasticity and fatigue tests. In this work the analytic/numerical methods and procedures were used to determine SIF and predicting the fatigue crack growth life of damaged structural components with notched cracks. For this purpose, finite element method
minion
发表于 2025-3-25 23:34:39
Dual Phase Austempered Ductile Iron - The Material Revolution and Its Engineering Applicationsination of high strength and ductility is a pressing requirement. Furthermore, with the introduction of free ferrite into the matrix increased machinability of ADI could be achieved. The aim of this paper was to review works that have been published over the past years on the effects of process vari
细查
发表于 2025-3-26 01:28:53
The Pyrolysis of Waste Biomass Investigated by Simultaneous TGA-DTA-MS Measurements and Kinetic Modeer temperature range 30–900 °C and under an argon (Ar) atmosphere. Model-free analysis for base prediction of decomposition process and deconvolution approach by Fraser-Suzuki functions were utilized for determination of effective activation energies (E), pre-exponential factors (A) and fractional c
过份好问
发表于 2025-3-26 07:49:05
http://reply.papertrans.cn/24/2333/233235/233235_27.png
Irritate
发表于 2025-3-26 10:44:56
http://reply.papertrans.cn/24/2333/233235/233235_28.png
transient-pain
发表于 2025-3-26 15:26:09
Mechanical Properties of Direct and Indirect Composite Materials Used in Prosthodonticsing silicone molds. A total of 160 specimens (80 direct composite specimens and 80 indirect composite specimens) were tested using tensile testing machine. Artglass showed minimal change in thickness (30.20 ± 23.0 μm) compared to others. The highest change in thickness was found in Heliomolar (86.2
hedonic
发表于 2025-3-26 19:33:59
http://reply.papertrans.cn/24/2333/233235/233235_30.png