钢笔尖
发表于 2025-3-23 10:13:52
http://reply.papertrans.cn/24/2328/232718/232718_11.png
称赞
发表于 2025-3-23 15:41:24
http://reply.papertrans.cn/24/2328/232718/232718_12.png
Antecedent
发表于 2025-3-23 21:24:32
http://reply.papertrans.cn/24/2328/232718/232718_13.png
arbiter
发表于 2025-3-24 01:29:10
http://reply.papertrans.cn/24/2328/232718/232718_14.png
国家明智
发表于 2025-3-24 04:01:52
http://reply.papertrans.cn/24/2328/232718/232718_15.png
有斑点
发表于 2025-3-24 08:37:01
Finite Volume Methods,As in the previous chapter, we shall consider only the generic conservation equation for a quantity φ and assume that the velocity field and all fluid properties are known. The finite volume method uses the integral form of the conservation equation as the starting point:
溃烂
发表于 2025-3-24 14:33:51
Turbulent Flows,Most flows encountered in engineering practice are turbulent; they are characterized by the following properties:
Breach
发表于 2025-3-24 17:50:07
http://reply.papertrans.cn/24/2328/232718/232718_18.png
易于
发表于 2025-3-24 21:39:35
Special Topics,In this chapter we briefly discuss some topics related to application of CFD in engineering practice. Many application areas require that some special phenomena or boundary conditions be taken into account; we shall address only few of them.
柏树
发表于 2025-3-25 02:30:21
Introduction to Numerical Methods,lows. The known solutions are extremely useful in helping to understand fluid flow but rarely can they be used directly in engineering analysis or design. The engineer has traditionally been forced to use other approaches.