obsession
发表于 2025-3-30 10:38:50
Elasto-Plastic Analysis of Thick Walled Cantilevered Tubesial and axial plastic zone penetrations and residual deflections are calculated in terms of the applied load or residual tip deflection. The analysis is restricted to small deflections with one loading/unloading cycle.
medieval
发表于 2025-3-30 12:52:29
http://reply.papertrans.cn/24/2327/232680/232680_52.png
debble
发表于 2025-3-30 19:45:54
http://reply.papertrans.cn/24/2327/232680/232680_53.png
incite
发表于 2025-3-31 00:21:38
Formulation of Reissner-Mindlin Moderately-Thick/Thin Plate Bending Elementsory by the assumed-stress type hybrid method. Both are free from spurious kinematic mode and not leading to “locking” phenomenon in thin plate limit. Numerical examples demonstrate improvement in stress and displacement performances when comparing with existing counterparts.
ILEUM
发表于 2025-3-31 02:57:15
Deformations and Stresses in Shallow Spherical and Paraboloidal Domes with Polar Openings under Rota symmetrical distributed loads is presented. The domes are considered to be of constant thickness and isotropic construction and to be supported continuously along the outer boundary by a rigid ring. A simplified yet accurate analysis is accomplished by the application of bending shell theory. The e
谄媚于人
发表于 2025-3-31 05:44:39
Algorithms for Nonlinear Contact Constraints with Application to Stability Problems of Rods and Shelan only be done by considering the geometrically nonlinear behaviour. Finite deflections and rotations have to be included for the post-buckling range. In some engineering applications the structures will undergo contact. This adds another type of nonlinearity to the formulation due to the inequalit
Intervention
发表于 2025-3-31 13:15:18
A Quadrilateral Membrane Element with Rotational Freedomss. The element has two translational and one rotational freedom per corner node. It is based on nonconforming displacement functions, still the element satisfies the convergence requirements including the patch test. Numerical studies show that the accuracy of the element is exceptionally good. It i
歪曲道理
发表于 2025-3-31 16:31:49
http://reply.papertrans.cn/24/2327/232680/232680_58.png
BOLT
发表于 2025-3-31 18:51:45
Influence of Element Form on Accuracy in Isoparametric Elementswhen distorted from a rectangular shape. In this paper, the explicit strain expressions for linear, quadratic and cubic isoparametric elements have been derived when the form of elements is a trapezoid. From these strain expression, it can see that strain components have a singularity of order one.
GOUGE
发表于 2025-3-31 23:21:25
Elasto-Plastic Analysis of Thick Walled Cantilevered Tubess based on the inverse solution of the nonlinear moment curvature relations, and thus no incremental approach is required. Residual stress fields, radial and axial plastic zone penetrations and residual deflections are calculated in terms of the applied load or residual tip deflection. The analysis