详细目录
发表于 2025-3-25 03:38:56
http://reply.papertrans.cn/24/2319/231834/231834_21.png
arrogant
发表于 2025-3-25 10:26:05
https://doi.org/10.1007/978-3-642-61487-3f the damage growth of several specimens. The T*-integral and S criteria may be successfully employed in the prediction of residual strength. However, S is better at predicting the direction of damage growth provided the stress fields near the delamination can be accurately modelled.
无价值
发表于 2025-3-25 12:00:46
The ,*-Integral and , Criteria for the Analysis of Impact Damage at Fastener Holes in Graphite/Epoxyf the damage growth of several specimens. The T*-integral and S criteria may be successfully employed in the prediction of residual strength. However, S is better at predicting the direction of damage growth provided the stress fields near the delamination can be accurately modelled.
penance
发表于 2025-3-25 18:16:25
f Technology, Scotland in July 1987. The Conference was organised and sponsored by Paisley College of Technology. It was co-sponsored by the Scottish Development Agency, the National Engineering Laboratory, the US Air Force European Office of Aerospace Research and Development and the US Army Resear
dialect
发表于 2025-3-25 21:41:58
Entscheidungstheorie und Statistik,mpact-induced delamination was investigated. It was found that the presence of adhesive layers could toughen the interface between two laminae and also reduce matrix cracking. A guide to the optical use of adhesive layers for improving impact resistance properties was proposed.
Inscrutable
发表于 2025-3-26 03:23:00
Grundlagen und Ziele statistischer Methoden, are given in a table. The structural indices that are used to calculate ratios between MMC and conventional material to compare weight to strength, impact resistance, efficiency of columns and plates, flexural rigidity, and structural efficiency indices for plates and shells are then discussed.
jumble
发表于 2025-3-26 04:40:33
http://reply.papertrans.cn/24/2319/231834/231834_27.png
Obituary
发表于 2025-3-26 10:46:24
Wieviel Beobachtungen werden benötigt?n the failure load and its location by means of micromechanical relations from which elastic and strength properties of the composite are computed. Numerical results are given in graphical form with a view towards the design of elliptic laminates by means of parametric studies.
Chronic
发表于 2025-3-26 14:04:29
https://doi.org/10.1007/978-3-642-77717-2eoretical way..It is made clear that the hybrid construction and through-the-thickness braiding is effective in strengthening the braided pipes. The braiding angle effect is also discussed in this chapter.
按时间顺序
发表于 2025-3-26 18:01:00
http://reply.papertrans.cn/24/2319/231834/231834_30.png