青少年
发表于 2025-3-26 22:53:54
http://reply.papertrans.cn/24/2319/231833/231833_31.png
arsenal
发表于 2025-3-27 02:54:04
http://reply.papertrans.cn/24/2319/231833/231833_32.png
licence
发表于 2025-3-27 07:23:23
http://reply.papertrans.cn/24/2319/231833/231833_33.png
dainty
发表于 2025-3-27 09:28:40
https://doi.org/10.1007/3-540-31097-5two-dimensional case when applied to configurations commonly encountered in spacecraft design, and the controllable parameters which affect temperature and associated distortion are identified. Thermal control is discussed in terms of treatment with surface coatings, insulation, and the use of heate
导师
发表于 2025-3-27 14:25:16
http://reply.papertrans.cn/24/2319/231833/231833_35.png
STANT
发表于 2025-3-27 18:17:51
https://doi.org/10.1007/3-540-31097-5replication of actual behavior and sensitivity of structural response to changes in design variables. These qualitative descriptors of analytical accuracy are translated into two proposed accuracy measures..The two measures are illustrated by application to the question of which of three codes best
牌带来
发表于 2025-3-28 00:15:47
https://doi.org/10.1007/3-540-31097-5ubjected to statically applied loads with stiffness, strength and elastic stability constraints. The optimization algorithm employed is based on the method of inscribed hyperspheres. This method uses a sequence of a linearized programs approach to find an optimum of a non-linear objective function s
Prostatism
发表于 2025-3-28 04:29:41
http://reply.papertrans.cn/24/2319/231833/231833_38.png
使害怕
发表于 2025-3-28 09:34:10
https://doi.org/10.1007/3-540-31097-5onstruction industry. However, that opportunity demands very close attention to workmanship, quality, time and economic performance if those interested are to fully reap the benefit. This applies particularly to the supplier of fibre-reinforced composite material components, whether for structural,
闹剧
发表于 2025-3-28 12:34:38
https://doi.org/10.1007/3-540-31097-5h ends were analyzed. As column shapes, three types of linearly tapered, parabolic and sinusoidal shapes were taken into consideration. The fabrication of such cylindrical columns with variable diameter and variable thickness are reasonably carried out with unique tailor-made feasibility of fibrous