袭击
发表于 2025-3-23 10:25:50
Technology for prepreg production of semifinished products of polymeric composite materials,scheme of fibrous filler orientation, with configuration close to that of the final part, which are then shaped into the part by pressing, vacuum, pneumatic, autoclave or thermocompression methods or by pultrusion.
蹒跚
发表于 2025-3-23 17:41:53
Forming of parts and components of fibre composites by winding,tress normal to the mandrel surface. Material layers are formed with each wind offset with respect to the previous one across the width. Also, the winds are placed on the mandrel in a state of static balance, i.e. they keep in place without sliding.
含水层
发表于 2025-3-23 18:21:49
Wolf-Gert Matthäus,Jörg Schulzees over metal alloys. A diagonal line drawn across the plot separates on the right-hand side supercomposites — materials with the highest specific strength (aramid plastics) and specific rigidity (carbon—epoxy composites). Carbon—epoxy composites demonstrate optimal property ratios.
非秘密
发表于 2025-3-24 01:49:17
https://doi.org/10.1007/978-3-8351-9211-9types. As a rule, the working medium is an energy carrier, heating the fixture and the item under moulding. The main advantage of the method of moulding with the aid of a tight shell is the possibility of uniform transmission of the pressure over the entire surface of the moulding part regardless of the complexity of its geometric form.
人类的发源
发表于 2025-3-24 05:17:25
Main technological aspects of the manufacture of composite parts and assembly,es over metal alloys. A diagonal line drawn across the plot separates on the right-hand side supercomposites — materials with the highest specific strength (aramid plastics) and specific rigidity (carbon—epoxy composites). Carbon—epoxy composites demonstrate optimal property ratios.
Missile
发表于 2025-3-24 07:22:07
http://reply.papertrans.cn/24/2319/231809/231809_16.png
Distribution
发表于 2025-3-24 13:07:14
Machining of polymer-composite materials,ring methods used, such as winding, moulding, casting and extrusion, allow one to obtain PCM products with high accuracy and high surface quality. However, the conditions of their installation into a structure in assembling, jointing, and fixturing require a considerable amount of machining.
idiopathic
发表于 2025-3-24 15:45:33
http://reply.papertrans.cn/24/2319/231809/231809_18.png
Allege
发表于 2025-3-24 20:34:16
https://doi.org/10.1007/978-94-011-1268-0Metall; composite; composite material; composite materials; manufacturing; polymer
懦夫
发表于 2025-3-25 00:21:42
978-94-010-4553-7Springer Science+Business Media Dordrecht 1995