从容
发表于 2025-3-27 00:30:40
https://doi.org/10.1007/978-3-031-54585-6and simple one-dimensional members, i.e., tensile rods, cantilevered and simply supported beams. At end of this chapter, some instructions are provided on how the concept of the specific energy absorption can be applied to arbitrary three-dimensional problems.
极少
发表于 2025-3-27 05:01:10
http://reply.papertrans.cn/23/2295/229475/229475_32.png
公理
发表于 2025-3-27 06:56:40
http://reply.papertrans.cn/23/2295/229475/229475_33.png
懒惰民族
发表于 2025-3-27 11:26:39
http://reply.papertrans.cn/23/2295/229475/229475_34.png
follicular-unit
发表于 2025-3-27 14:50:44
Book 2024atures the knowledge exchange. The papers cover a wide range of engineering disciplines, highlighting the impact of these collaborations in addressing real-world challenges and advancing technological developments..
pacific
发表于 2025-3-27 18:32:59
http://reply.papertrans.cn/23/2295/229475/229475_36.png
使饥饿
发表于 2025-3-27 23:24:27
http://reply.papertrans.cn/23/2295/229475/229475_37.png
保全
发表于 2025-3-28 03:48:44
Shame and Gender in Transcultural Contextsuctures in the vicinity of the notch base. The key requirement to ensure a continuous stress curve can be accurately represented throughout the meshing of the notch base. By meeting this criterion, the calculated fatigue strength becomes less sensitive to gradient fluctuations.
欢腾
发表于 2025-3-28 08:27:11
,From Raw Data to Master Curve - Improving the Time-Temperature Superposition Process Using Geometriw measurement data up to the export of the master curve, its further use in calibration of the suitable material model or a definition of the material properties directly for a finite element software.
怕失去钱
发表于 2025-3-28 14:20:15
Concept for a Systematic Setup of a Hot Gas Welding Process for Glasfiber Reinforced Polyamides,meters is analyzed. Systematic investigations allow statements to be made on the correlation between the individual process parameters like heating time, temperature of the hot gas welding tool and temperature of the polymer. Furthermore, a procedure for the systematic adjustment of the hot gas welding process is developed.