OFF
发表于 2025-3-25 07:15:46
http://reply.papertrans.cn/23/2293/229292/229292_21.png
催眠药
发表于 2025-3-25 07:47:27
http://reply.papertrans.cn/23/2293/229292/229292_22.png
Mortal
发表于 2025-3-25 14:03:47
Cold Spray Deposition on Polymeric and Composite Substrates, and in the military because of their low density, high specific strength and stiffness, and other unique properties such as ease formation and machining, well size stability. At the same time the use of polymeric components in aircraft, automobile, and power sector has gradually increased due to th
GRAIN
发表于 2025-3-25 16:05:48
http://reply.papertrans.cn/23/2293/229292/229292_24.png
Myosin
发表于 2025-3-25 22:02:54
http://reply.papertrans.cn/23/2293/229292/229292_25.png
MILK
发表于 2025-3-26 03:05:45
David J. Cornforth,Marc T. P. Adame the undesirable thermal effects of current freeform manufacturing techniques, as well as drastically increase the available deposition rates. In cold spray, feedstock particles are injected in a supersonic gas flow and accelerated to velocities as high as 1200 m/s prior to impact. This high impact
机制
发表于 2025-3-26 07:30:05
http://reply.papertrans.cn/23/2293/229292/229292_27.png
PALL
发表于 2025-3-26 10:06:28
Evaluation-Based Design Principlesal and off-axis forms. The off-axis geometry has shown improvements in the deposition of titanium alloys, stellite, tungsten, and even oxide dispersion strengthened steel. While LACS can improve the deposition efficiency, it will also impact the microstructure of the sprayed material, either positiv
连接
发表于 2025-3-26 15:46:14
http://reply.papertrans.cn/23/2293/229292/229292_29.png
Nuance
发表于 2025-3-26 17:49:16
http://reply.papertrans.cn/23/2293/229292/229292_30.png