技术
发表于 2025-3-28 16:36:49
Gas Flow, Particle Acceleration and Heat Transfer in Cold Spray Additive Manufacturing,g of particle acceleration and heating behavior inside and outside a cold spray nozzle is critical for developing high-performance cold sprayed deposits. Over the years, much effort has been devoted to investigate the supersonic gas flow and the consequent particle acceleration and heating behavior
incredulity
发表于 2025-3-28 22:48:07
http://reply.papertrans.cn/23/2293/229291/229291_42.png
Arthropathy
发表于 2025-3-29 02:16:11
Microstructures of Cold Sprayed Deposits,crostructural evolution mechanism of cold sprayed deposits. The microstructure is largely dependent on the plastic deformation behaviour of cold spray feedstock particles during their deposition. As the plastic deformation of cold spray particles is not homogenous with severe plastic deformation occ
nautical
发表于 2025-3-29 05:56:22
http://reply.papertrans.cn/23/2293/229291/229291_44.png
entail
发表于 2025-3-29 09:43:19
http://reply.papertrans.cn/23/2293/229291/229291_45.png
胆汁
发表于 2025-3-29 15:18:19
Cold Sprayed Nanostructured Metallic Deposits,or CSAM to gain the capability to produce deposits with nanostructure. However, nanoparticles, due to their low weights, are difficult to deposit on the substrate via CSAM. They are easy to be picked up by the driving gas and thereby suffer from dramatic deceleration when passing through the compres
reflection
发表于 2025-3-29 16:01:02
Cold Sprayed Metallic Glass and High Entropy Alloy Deposits,s. However, there are many challenges during the manufacturing process of MGs and HEAs using conventional fabrication techniques which hinders their development as engineering materials. Cold spray as a burgeoning metal deposition and solid-state additive manufacturing technology provides an alterna