orient
发表于 2025-3-23 12:26:52
Joshua Hall,Peta Wyeth,Daniel JohnsonFinite element modeling and numerical simulation analysis of the spline cold rolling precision forming process have been carried out with software DEFORM-3D. The simulated results are compared with those obtained from the theoretical analysis.
FLEET
发表于 2025-3-23 13:53:12
Moozhan Shakeri,Richard Kingston,Nuno PintoMetal flow and deforming rules of the cold rolling spline tooth during the forming process, the accuracy, defects and the forming quality control of the cold rolling forming process have been described and analyzed.
Homocystinuria
发表于 2025-3-23 21:22:48
Tim Marsh,Minhua Ma,Stefan GöbelMechanism and process analysis on two-wheel and three-wheel cold rolling forming of threads have been analyzed. Diameter conditions of three-wheel rolling threads and relative movement between the workpiece and the rolling wheel have also been analyzed.
绕着哥哥问
发表于 2025-3-23 22:44:48
http://reply.papertrans.cn/23/2293/229290/229290_14.png
温顺
发表于 2025-3-24 05:20:05
Lecture Notes in Computer ScienceThe rolling force, velocity field, and stress and strain field in the cold rolling forming of threads are analyzed with numerical simulation methods. The failure process of thread components has also been analyzed.
Ascendancy
发表于 2025-3-24 06:30:36
http://reply.papertrans.cn/23/2293/229290/229290_16.png
微生物
发表于 2025-3-24 10:50:34
Mareike Bockholt,Katharina Anna ZweigDesign of the cold rolling forming machine and dies and measurement of the mechanical parameters of the cold rolling precision forming equipment have been described. Typical cold rolling forming equipment production enterprises, product properties, characteristics, and technique parameters have also been briefly introduced.
天然热喷泉
发表于 2025-3-24 14:56:04
General Introduction,Characteristics of cold rolling precision forming technology, present situation of shaft parts manufacturing technology, research progress on the cold rolling precision forming technology, and development trends on cold rolling precision forming technology of shaft parts are introduced.
EXALT
发表于 2025-3-24 22:54:39
Process Parameters in the Cold Rolling Forming of Spline,Design methods of the spline cold rolling precision forming process parameters, such as the contact area of the spline shaft, rolling force and rolling moment, and the calculation of the cold rolling workpiece billet diameter have been illustrated and analyzed.
AMPLE
发表于 2025-3-24 23:45:56
http://reply.papertrans.cn/23/2293/229290/229290_20.png