收集
发表于 2025-3-23 10:46:01
The logic of time, chance, and action, interaction string-resonator is presented introducing the concepts of string impedance and reflection factor. The global resonant system is studied as a three degree of freedom represented as an analog circuit in Appendix, and the important subject of the coupling between oscillators is discussed a
鸵鸟
发表于 2025-3-23 14:40:49
http://reply.papertrans.cn/23/2271/227075/227075_12.png
Myelin
发表于 2025-3-23 19:07:37
Lecture Notes in Computer Scienceurement system including the acoustic hammer and other devices used to excite the finished instrument or part of it. The Chladni method is also outlined as complementary to the acoustic hammer method. Photographs and dimensions of the tools are given in order to allow duplicating them. A software sy
粘土
发表于 2025-3-24 00:22:01
http://reply.papertrans.cn/23/2271/227075/227075_14.png
大量
发表于 2025-3-24 05:33:09
Representing Plans Under Uncertaintyiding an objective description of the profile. Then the general characteristics of top, sides, back, neck are given. Also the double tops with Nomex and their assembly are presented. The reader is introduced to a novel fingerboard profiling approach, which provides a graded relief. The chapter analy
ureter
发表于 2025-3-24 07:40:47
Rape in the Medieval Latin Comediesdes, top and back can be mounted and the resonances can be evaluated through the acoustic hammer and FFT or, as an alternative, looking to the Chladni patterns. This chapter describes such a mould and provides several photos and construction details. Also given is an approach for building an electro
cultivated
发表于 2025-3-24 12:13:31
Elizabeth Robertson,Christine M. RoseIn order to prevent damages to the soundboard due to the pull of the strings, basic design criteria and a mathematical calculation (moment of inertia, dimensions) are given for braces. The chapter also presents no fewer than seventeen innovative, non traditional bracing patterns and their properties
B-cell
发表于 2025-3-24 15:34:28
http://reply.papertrans.cn/23/2271/227075/227075_18.png
uveitis
发表于 2025-3-24 22:29:21
Elizabeth Robertson,Christine M. Rose and of adjusting the amplitudes and the shape of the modal areas. The target is to reach an optimum coupling top to back via the air in the cavity. As this chapter shows, the process is done firstly with the back on the mould, both looking to the Chladni patters obtained via the electromagnetic exc
DEAWL
发表于 2025-3-24 23:23:46
http://reply.papertrans.cn/23/2271/227075/227075_20.png