FOLLY 发表于 2025-4-1 02:25:50

Evaluating the Influence of Size Effects on Load-Displacement Behavior and Failure in Threaded Fastr Variable Differential Transducers (LVDTs) located on the outside edge of the bushing fixtures to measure a more global response of the bushing displacement, and the stroke of the test frame. This test series clarified many ambiguities in the experimental process and further established a feasible testing method for small fasteners.

发表于 2025-4-1 07:01:59

Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg Using High-Speed Sility compared to the cast specimens under dynamic tension. The microstructures of the samples were characterized by synchrotron X-ray tomography. The correlation between the dynamic fracture behavior of the samples and the microstructure of the samples was analyzed and discussed.

无意 发表于 2025-4-1 11:21:42

Mechanics and Mechanisms of Slow Crack Propagation in Brittle Hydrogels,n at a “weak” point in the crack surface. Based on these observations, we hypothesize that there are two interconnected mechanisms at play: The crack is slow enough that the gel “sees” the stress concentrations at the crack tip and water is forced out of the gel while there is also time for viscoelastic and plastic processes to occur.

Fallibility 发表于 2025-4-1 14:22:04

http://reply.papertrans.cn/23/2235/223471/223471_64.png

要塞 发表于 2025-4-1 19:43:10

https://doi.org/10.1007/978-1-4684-2073-9gion, a small crack is put and then the growth of crack during cyclic loading is studied till the failure of the specimen. The variation of stress intensity factor with respect to crack length and the number of cycles is evaluated for crack perpendicular to the contact length.
页: 1 2 3 4 5 6 [7]
查看完整版本: Titlebook: Challenges in Mechanics of Time Dependent Materials, Fracture, Fatigue, Failure and Damage Evolution; Proceedings of the 2 Meredith Silbers