integrated
发表于 2025-3-28 15:10:17
http://reply.papertrans.cn/23/2235/223470/223470_41.png
终点
发表于 2025-3-28 19:29:42
On the Use of iDIC (Integrated Digital Image Correlation) for the Slitting Method,connected to the residual stress values..To verify the new approach, an aluminum beam is loaded in bending above the yield stress and then unloaded using a four-point configuration; then, the slot is performed using a milling machine while imaging the back face. The use of strain gauges allows compa
线
发表于 2025-3-28 23:52:43
A Rapid Procedure to Reconstruct S/N Curve by Using Harmonic Components of Thermal Signal,egradation and FAH and specific material properties, it is possible to reconstruct the S/N curve by carrying out just one constant amplitude test and a stepwise rapid test. Moreover, the capability of temperature FAH to study fatigue behaviour and detect damage during any loading procedure is also p
序曲
发表于 2025-3-29 03:57:19
Rapid Fatigue Characterization via Infrared Thermography of AM-CM Composites,d to ascertain these composites’ static strength and stiffness properties. The current chapter strives to correlate the microstructure of these composites with their fatigue performance using rapid infrared thermography (IRT). A typical “staircase” loading has been adopted for IRT-based fatigue test
雄伟
发表于 2025-3-29 08:47:52
http://reply.papertrans.cn/23/2235/223470/223470_45.png
jovial
发表于 2025-3-29 13:26:27
Effect of Geometrical Discontinuities on Mode Shapes Stress Maps Using Infrared Thermography, much higher frequencies, of hundreds and even thousands of Hertz. In this work, the authors evaluate the capabilities of this methodology, based on harmonic excitation of mechanical components, to identify the effect of discontinuities on the stress maps associated with mode shapes. It is based on
可行
发表于 2025-3-29 17:54:02
http://reply.papertrans.cn/23/2235/223470/223470_47.png