SPASM
发表于 2025-3-25 07:17:44
Thermal Shock Behaviour,ceramic components, high thermal stresses are generated which are responsible for the extension of existing cracks. Whereas in metals the temperature gradients only cause small plastic deformations, in the case of ceramics with its linear elastic material behaviour high stresses are generated. As a
鬼魂
发表于 2025-3-25 08:30:56
http://reply.papertrans.cn/23/2233/223252/223252_22.png
AUGER
发表于 2025-3-25 12:42:44
http://reply.papertrans.cn/23/2233/223252/223252_23.png
BET
发表于 2025-3-25 16:18:02
0933-033X racture-mechanical and statistical principles and their use in describing the scatter of strength and lifetime are also covered. Special chapters are devoted to creep behaviour, multiaxial failure criteria and thermal shock behaviour.978-3-642-63580-9978-3-642-58407-7Series ISSN 0933-033X Series E-ISSN 2196-2812
圆锥
发表于 2025-3-25 22:28:08
Ceramics978-3-642-58407-7Series ISSN 0933-033X Series E-ISSN 2196-2812
Enthralling
发表于 2025-3-26 01:25:56
http://reply.papertrans.cn/23/2233/223252/223252_26.png
是剥皮
发表于 2025-3-26 07:59:37
RMG-Optimierung eines Lagerblockes,ty ρ, specific heat C., density ρ, Young’s modulus . and Poisson’s ratio ν. These properties are not only important for material selection for a specific physical application, they also characterize the thermal shock sensitivity of ceramics.
明确
发表于 2025-3-26 10:16:13
Problemdefinition und Algorithmenauswahl,ts may be pores, cracks or inclusions. The brittleness of ceramic materials is caused by the low resistance against crack extension. The observed large scatter in strength is due to the scatter of flaw size in a component.
Femine
发表于 2025-3-26 14:55:36
RMG-Optimierung eines Lagerblockes,existing in the material. The scatter of strength, therefore, is caused by the scatter of the flaw size. This is also the reason for a pronounced influence of the component size on strength. The lifetime of ceramics undergoing subcritical crack extension also shows a large amount of scatter, which can be related to the scatter of the strength.
organic-matrix
发表于 2025-3-26 18:02:02
,Kombination und Vergleich beider Ansätze,reep-induced deformation itself may lead to a design limit if the function of a component is affected by an excessive global deformation. Creep rupture consists in the formation and extension of creep cracks.