exigent
发表于 2025-3-26 22:57:28
http://reply.papertrans.cn/23/2233/223243/223243_31.png
GOAD
发表于 2025-3-27 03:55:54
http://reply.papertrans.cn/23/2233/223243/223243_32.png
AMPLE
发表于 2025-3-27 07:40:31
http://reply.papertrans.cn/23/2233/223243/223243_33.png
固执点好
发表于 2025-3-27 12:05:58
Introduction,ly has characteristics better than or different from those of either component. The matrix phase is the continuous phase, while the distributed phase, commonly called the reinforcement phase, can be in the form of particles, whiskers or short fibers, continuous fibers or sheet. Figure 1.1 shows the
CODA
发表于 2025-3-27 15:36:52
http://reply.papertrans.cn/23/2233/223243/223243_35.png
内阁
发表于 2025-3-27 20:05:20
Ceramic reinforcements,inforcing ceramic materials. They combine rather high strength and elastic modulus with high-temperature capability and a general freedom from environmental attack, making them attractive as reinforcements in high-temperature structural materials. It is convenient to divide the ceramic reinforcement
Estrogen
发表于 2025-3-27 22:46:49
http://reply.papertrans.cn/23/2233/223243/223243_37.png
安定
发表于 2025-3-28 03:52:47
Thermal stresses,s and CMCs. The analytical expressions obtained in section 8.1 and 8.2 have, of course, general validity. We shall then apply the results obtained in these sections to CMCs and derive some important guidelines to obtain enhanced fracture toughness in these materials.
易受骗
发表于 2025-3-28 09:33:40
Interface mechanics and toughness, elusive property called toughness. We discussed the general features of interface and its importance in composites in Chapter 5. Now we look at the subject of tailoring this interface in CMCs with a view to obtaining an enhanced fracture toughness in these materials. We give some examples of the in
Longitude
发表于 2025-3-28 11:09:51
http://reply.papertrans.cn/23/2233/223243/223243_40.png