Exonerate 发表于 2025-3-26 22:26:11
http://reply.papertrans.cn/23/2233/223229/223229_31.png图表证明 发表于 2025-3-27 03:27:50
https://doi.org/10.1007/978-3-642-99599-6weled to machined surfaces that in turn are firmly connected to the foundations. To simplify the installation of horizontal-shaft units, these machined surfaces are usually part of a conmion baseplate on which either the pump or the pump and its driver have been prealigned.FLAT 发表于 2025-3-27 05:31:07
https://doi.org/10.1007/978-3-642-99599-6afting. Vertical-shaft pumps fall into two separate classifications: (1) dry pit and (2) wet pit. The former operate surrounded by air, whereas the latter are either fully or partially submerged in the liquid handled.粘 发表于 2025-3-27 12:00:28
,Einleitung. Historische Übersicht,addition is still kinetic, the addition of velocity, but that employ effects other than that of the classical centrifugal pump (see Chap. 2) to do so. At present there are six distinct types of special effect pumps: regenerative, partial emission, induced vortex, viscous drag, impact, and reversible.intimate 发表于 2025-3-27 14:50:26
http://reply.papertrans.cn/23/2233/223229/223229_35.pngsubordinate 发表于 2025-3-27 20:43:07
https://doi.org/10.1007/978-3-642-99346-6The term “casing” is generally used to describe the component that “contains” the pump. In practice a pump’s casing has five functions:flaggy 发表于 2025-3-27 22:18:25
http://reply.papertrans.cn/23/2233/223229/223229_37.png平息 发表于 2025-3-28 03:18:51
http://reply.papertrans.cn/23/2233/223229/223229_38.png宣称 发表于 2025-3-28 08:24:15
Classification and NomenclaturePumping can be defined as the addition of energy to a fluid to move it from one point to another. It is not, as frequently thought, the addition of pressure. Because energy is capacity to do work, adding it to a fluid causes the fluid to do work, normally flowing through a pipe or rising to a higher level.Incorruptible 发表于 2025-3-28 13:09:59
Casings and DiffusersThe term “casing” is generally used to describe the component that “contains” the pump. In practice a pump’s casing has five functions: