兵团
发表于 2025-3-28 16:45:45
http://reply.papertrans.cn/23/2227/222685/222685_41.png
trigger
发表于 2025-3-28 20:17:31
Three-dimensional Simulation of Cavitation Instabilities,e spacing. This agrees with the results of two-dimensional stability analysis assuming blade surface cavitation. However, in real flows, tip cavitation is most significant. So, this chapter discusses about cavitation instabilities mainly based on three-dimensional CFD.
臭了生气
发表于 2025-3-29 00:37:08
http://reply.papertrans.cn/23/2227/222685/222685_43.png
GLADE
发表于 2025-3-29 04:17:02
http://reply.papertrans.cn/23/2227/222685/222685_44.png
Criteria
发表于 2025-3-29 08:50:57
,On the Preliminary Design and Performance Prediction of Centrifugal Turbopumps—Part 2, (d’Agostino et al. .) is here interfaced with the calculation of the boundary layers inside the blade channels and other major forms of flow losses, with the aim of developing an effective tool for rapid parametric optimization of the machine performance and geometry under appropriate design constr
sacrum
发表于 2025-3-29 15:03:44
http://reply.papertrans.cn/23/2227/222685/222685_46.png
duplicate
发表于 2025-3-29 19:01:58
Numerical Simulation of Cavitating Flows in Complex Geometries,els assuming a homogeneous barotropic flow behavior. Different numerical issues are analyzed and possible solutions are presented and validated. Finally, an application to the simulation of the flow in a real turbopump inducer designed for liquid-propelled rockets is presented.