accrete
发表于 2025-3-30 10:10:36
http://reply.papertrans.cn/23/2204/220380/220380_51.png
抗体
发表于 2025-3-30 13:19:16
http://reply.papertrans.cn/23/2204/220380/220380_52.png
Initiative
发表于 2025-3-30 17:01:18
Program proving,onditions. The part program . be proof-tested on the machine by any of the following methods before production starts; in fact, it is a good idea (and often necessary) to prove the program by more than one method.
项目
发表于 2025-3-30 23:06:43
http://reply.papertrans.cn/23/2204/220380/220380_54.png
Hiatal-Hernia
发表于 2025-3-31 01:39:25
Xiaoyu Wang,Wenjing Guo,Hui Wei Z axis setting value and the X axis setting value. These values position the tool tip in relation to the turret datum in the X and Z axes (Figure 9.1). (Milling tools are catered for in the part program by the tool length offset and the cutter diameter compensation facilities.)
果核
发表于 2025-3-31 06:58:31
http://reply.papertrans.cn/23/2204/220380/220380_56.png
nullify
发表于 2025-3-31 12:42:10
http://reply.papertrans.cn/23/2204/220380/220380_57.png
有机体
发表于 2025-3-31 14:36:00
http://reply.papertrans.cn/23/2204/220380/220380_58.png
faucet
发表于 2025-3-31 18:04:02
Tom Renshaw,Peter Riley (Head of Department of Eng
RADE
发表于 2025-4-1 00:09:31
http://reply.papertrans.cn/23/2204/220380/220380_60.png