辫子带来帮助 发表于 2025-3-23 11:53:11
http://reply.papertrans.cn/23/2204/220354/220354_11.pngConfirm 发表于 2025-3-23 14:06:07
Conclusions,e prohibits lossless conversion, in contrast to inductive converters which ideally achieve 100 % efficiency at a finite switching frequency. Clearly there are enough reasons to prefer an inductive DC–DC converter over a capacitive type.严厉谴责 发表于 2025-3-23 18:53:58
,Modeling and Design of Capacitive DC–DC Converters,ed. These techniques are used to perform a first feasibility analysis for inclusion of capacitive converters in the power-management interface of an integrated system. For example by calculating the maximum theoretical efficiency (Equation .) that can be achieved by the converter topology. This coarAGOG 发表于 2025-3-24 00:53:49
Noise Reduction by Multi-Phase Interleaving and Fragmentation,lso part of a SoC. Therefore the noise influences the other building blocks of the SoC. It is shown in this chapter that noise mitigation in fully integrated DC–DC converters has a certain cost, related to the chip area that is required to achieve this. The resilience of the other building blocks wi密切关系 发表于 2025-3-24 03:55:35
Control of Fully Integrated Capacitive Converters,quirements. These system supply requirements are imposed either through the power-source characteristics or through power-management specifications. Irrespective of the motivation for using a DC-DC converter, the primary concern is to ensure a predictable output voltage and a predictable response on声音刺耳 发表于 2025-3-24 07:09:43
Monolithic Integration of DC-DC Converters in CMOS,ive and passive components, the switches and the capacitors, which are structured according to a specific topology described in Chap. 2 and reconfigured based on a control method described in Chap. 5. These chapters take a number of imperfections into account. As is illustrated in Chap. 3 these impearrogant 发表于 2025-3-24 11:38:40
http://reply.papertrans.cn/23/2204/220354/220354_17.png不能根除 发表于 2025-3-24 18:11:02
Emerging Issues in Nanomedicine and Ethicsed. These techniques are used to perform a first feasibility analysis for inclusion of capacitive converters in the power-management interface of an integrated system. For example by calculating the maximum theoretical efficiency (Equation .) that can be achieved by the converter topology. This coarcognizant 发表于 2025-3-24 22:07:28
http://reply.papertrans.cn/23/2204/220354/220354_19.pngcylinder 发表于 2025-3-24 23:29:15
Nanobiosensors for Biomedical Applications,quirements. These system supply requirements are imposed either through the power-source characteristics or through power-management specifications. Irrespective of the motivation for using a DC-DC converter, the primary concern is to ensure a predictable output voltage and a predictable response on