amygdala
发表于 2025-3-25 04:39:06
http://reply.papertrans.cn/23/2202/220171/220171_21.png
摇曳的微光
发表于 2025-3-25 07:44:44
Was gilt in Wohnungseigentumsanlagen?,ed. Both the undercut and the overcut are allowed if and only if the resultant deviations of the machined part surface from the desired part surface are within the tolerance limit of accuracy of the part surface.
MEEK
发表于 2025-3-25 13:09:10
http://reply.papertrans.cn/23/2202/220171/220171_23.png
取消
发表于 2025-3-25 16:03:36
http://reply.papertrans.cn/23/2202/220171/220171_24.png
monogamy
发表于 2025-3-25 21:36:06
http://reply.papertrans.cn/23/2202/220171/220171_25.png
Serenity
发表于 2025-3-26 01:13:20
http://reply.papertrans.cn/23/2202/220171/220171_26.png
打算
发表于 2025-3-26 05:20:14
Book 2008r automotive and consumer electronics products. In other cases, products have sculptured surfaces to meet functional requirements. Functional surfaces interact with the environment or with other surfaces. Because of this, functional surfaces can also be called dynamic surfaces. Functional surfaces d
Crumple
发表于 2025-3-26 10:55:42
http://reply.papertrans.cn/23/2202/220171/220171_28.png
客观
发表于 2025-3-26 16:12:38
http://reply.papertrans.cn/23/2202/220171/220171_29.png
慢跑
发表于 2025-3-26 18:13:17
CAD/CAM of Sculptured Surfaces on Multi-Axis NC Machine