murmur
发表于 2025-3-25 03:27:43
Strategic Planning for the Factory of the Future capital or capability to organize a takeover have been able to acquire profitable manufacturing companies making their own growth hostage to the growth of the new entity. This trade-off weakened the parent company giving the edge to competition and leaving the domestic producers vulnerable.
corporate
发表于 2025-3-25 09:11:03
http://reply.papertrans.cn/23/2202/220166/220166_22.png
最低点
发表于 2025-3-25 13:24:24
The Interrelationship of Parts Classification and Gripper Design for Automated Assemblyires that parts and robotic end-effectors (grippers) be concurrently and interactively designed. The authors present an innovative method of designing for manufacturability by coordinating parts and gripper design through a parts-classification system that employs six geometric configurations: cylin
闲聊
发表于 2025-3-25 17:33:40
CARA — The Next Generationduce the amount of reprogramming required in the factory of the future. An interdisciplinary group of students have been given the task of producing such a Computer Assisted Robotics Assembly (CARA) System. An early prototype served the “Blocks World” environment. Current work is being performed wit
噱头
发表于 2025-3-25 21:26:27
Pin Assembly by Robotn. These pins are used for making the connectors for various electronic instruments. The pin is assembled using pneumatic grippers which are fitted on the robot shaft. Each gripper picks up the appropriate part using vacuum. It blows out the part when assembling the pin. The grippers are driven by e
蚀刻
发表于 2025-3-26 03:21:20
http://reply.papertrans.cn/23/2202/220166/220166_26.png
未开化
发表于 2025-3-26 05:39:40
ADAR: A New Vision of Tasks Programming for Robotized Industrial Workcelland to specify (and later to implement) a host software structure (as methodologic tools for the specification of the application, programming, debugging and simulation tools), intended as a support and an aid for robotized tasks programming. The ADAR system assumes the cooperation between these too
OTHER
发表于 2025-3-26 10:09:06
http://reply.papertrans.cn/23/2202/220166/220166_28.png
书法
发表于 2025-3-26 13:00:14
http://reply.papertrans.cn/23/2202/220166/220166_29.png
哀悼
发表于 2025-3-26 17:21:08
The Interrelationship of Parts Classification and Gripper Design for Automated Assemblydrical, rectangular, triangular, elliptical or spherical, holed, and flexible. This method enables the fewest possible end-effector designs (ideally, one) to manipulate the greatest variety of parts and subassemblies.