Dappled
发表于 2025-3-25 04:31:54
http://reply.papertrans.cn/20/1918/191754/191754_21.png
incarcerate
发表于 2025-3-25 09:29:20
http://reply.papertrans.cn/20/1918/191754/191754_22.png
祖传财产
发表于 2025-3-25 14:36:34
Estimation in Parametric Models,materials, such as metal, wood and concrete, have been known for centuries, but plastics materials were widely produced for the first time only relatively recently, and are the fruits of modern science and technology.
Misgiving
发表于 2025-3-25 17:28:45
http://reply.papertrans.cn/20/1918/191754/191754_24.png
AUGUR
发表于 2025-3-25 23:51:15
Estimation in Nonparametric Models, is usually an essential service. Obviously, pipes of adequate size must be used and gauges are needed for metering or measuring the flow. Open channels and gutters are also required to carry away rainwater, etc., and these must also be properly designed.
Popcorn
发表于 2025-3-26 03:09:13
Estimation in Nonparametric Models,e, you can hear the sound produced because the table top is vibrating to and fro. The vibration of a bee’s wings as it flies through the air causes the familiar and ominous buzzing sound. Vibration of the vocal cords produces the sound we know as speech. The crack as a batsman hits the cricket ball
probate
发表于 2025-3-26 04:40:39
Estimation in Nonparametric Models,temperature above that of the outside environment. This means that because the house is at a higher temperature than its surroundings, it loses heat to the surroundings (figure 12.1). Unless the heat is replenished, the house will get cold, so more fuel is necessary to maintain a reasonable temperat
organic-matrix
发表于 2025-3-26 08:59:17
Estimation of Unknown Constants,igated quantitatively, and gives rise to certain important terms. The . experienced by the material, which depends on the size of the force operating, and the area over which it operates (figure 14.1) is given by the equation
小母马
发表于 2025-3-26 14:14:32
http://reply.papertrans.cn/20/1918/191754/191754_29.png
NEXUS
发表于 2025-3-26 19:00:50
Plastics,materials, such as metal, wood and concrete, have been known for centuries, but plastics materials were widely produced for the first time only relatively recently, and are the fruits of modern science and technology.