stress-response
发表于 2025-3-25 06:25:17
Mounting the Electronics,e axes. You can turn these by hand (or use a drill) and watch as the individual axes move up and down, side to side, and front to back. But now it’s time to bring your machine to life. Back in Chapter 6, you wired up the electronics and motors; in this chapter, you’ll be mounting those motors to you
Formidable
发表于 2025-3-25 09:03:25
http://reply.papertrans.cn/20/1916/191555/191555_22.png
LEERY
发表于 2025-3-25 15:41:32
https://doi.org/10.1007/978-3-8348-9456-4breviation for ., then, is a machine that carves out objects in three dimensions from a solid block of material. CNC machines are commonly used in industry to produce small parts such as bicycle stems and tools. Low-cost CNC machines are increasingly used by serious hobbyists, especially woodworkers
恫吓
发表于 2025-3-25 19:19:35
http://reply.papertrans.cn/20/1916/191555/191555_24.png
vocation
发表于 2025-3-25 21:45:23
https://doi.org/10.1007/978-3-8348-9456-4to do just that. But before we begin, let’s take some time to talk about this project because, frankly, it’s a big one! The authors of this book have gone through this process (and in some instances, more than once), and there’s a lot of lessons that have been learned—often from mistakes!
parallelism
发表于 2025-3-26 00:33:14
http://reply.papertrans.cn/20/1916/191555/191555_26.png
容易懂得
发表于 2025-3-26 04:42:13
https://doi.org/10.1007/978-3-8348-9456-4hose pieces have to somehow be connected in such a way that the machine doesn’t fall apart. Keep in mind that your CNC machine will be moving— the z-axis will be moving up and down and side to side on both the y-axis and the x-axis. Often these movements will start and stop quickly. Your CNC machine
代理人
发表于 2025-3-26 11:05:10
https://doi.org/10.1007/978-3-8348-9456-4n this book will cover the building of the CNC machine—cutting, drilling, and bolting together various MDF pieces to make the physical frame of the machine. The other part of the machine is the electronics. Three motors will be used to move the router and allow your CNC machine to do the job you wan
创新
发表于 2025-3-26 16:06:55
Forderungen der industriellen Logistik,at will wrap around the tabletop. This will consist of cutting a piece that will be mounted under the tabletop (with its surface parallel to the surface the final CNC machine will sit on) and two pieces that will be mounted above the tabletop.
薄荷醇
发表于 2025-3-26 18:03:50
http://reply.papertrans.cn/20/1916/191555/191555_30.png