evaculate 发表于 2025-3-23 11:00:08

http://reply.papertrans.cn/19/1892/189165/189165_11.png

finite 发表于 2025-3-23 16:59:58

The Effects of Preferential Solvents on the Phase Separation Morphology of Styrene-Ethylene Oxide B the morphology of block copolymers of poly(ethylene oxide) (PEO) and polystyrene (PS) as well as poly (propylene oxide) and PS, in concentrated solutions using small angle x-ray techniques. By varying both concentration and solvent type, they were able to create several interesting gel structures.

VEST 发表于 2025-3-23 21:32:42

http://reply.papertrans.cn/19/1892/189165/189165_13.png

使苦恼 发表于 2025-3-24 00:09:05

Segmented Polyurethanes: Properties as a Function of Segment Size and Distribution,ristic of crosslinked elastomers over a wide temperature range but, at higher temperatures, melt and can be processed by techniques used for plastics and fibers(1). This behavior is explained by the fact that the polymers possess a three-dimensional network built up by intermolecular association (cr

Ganglion 发表于 2025-3-24 04:00:12

Mechanical and Optical Properties of Block Polymers II. Polyether Urethanes,tion. Typically, an elastomeric block polymer is built of alternate segments of a glassy or rigid polymer and a rubbery polymer resulting in a material which is more flexible than the pure rigid polymer, but possessing a higher modulus than the pure rubbery segment. The intelligent design of block p

比喻好 发表于 2025-3-24 06:48:04

http://reply.papertrans.cn/19/1892/189165/189165_16.png

含水层 发表于 2025-3-24 14:03:13

http://reply.papertrans.cn/19/1892/189165/189165_17.png

急急忙忙 发表于 2025-3-24 14:57:28

Structure and Properties of Alternating Block Polymers of Dimethylsiloxane and Bisphenol-A Carbonature exists on the scale of 10. A ca.. Many physical properties of these systems are well known to differfrom those of their random-copolymerized counterparts because of this structure. Block polymers of dimethylsiloxane and bisphenol-A carbonate have been synthesized by H. A. Vaughn.which exhibit ph

性别 发表于 2025-3-24 19:49:46

Wavelets in 1989 : An extended summary,on of low molecular weight polystyrene adds further reinforcement. (For example, this addition to a SBS polymer of 30 wt. % styrene to give an overall composition of 40 wt. % styrene increased the modulus at an extension ratio of 5 from 23 to 44 kg. /cm.. at a strain rate of 31.5 min..)

不整齐 发表于 2025-3-25 01:52:30

http://reply.papertrans.cn/19/1892/189165/189165_20.png
页: 1 [2] 3 4 5 6
查看完整版本: Titlebook: Block Polymers; Proceedings of the S S. L. Aggarwal (Manager) Conference proceedings 1970 Plenum Press, New York 1970 polymer.polymer chemi