金桌活画面
发表于 2025-3-25 05:03:35
https://doi.org/10.1007/978-3-663-16274-2must first undertake a geometrical analysis of the forces acting on the joint. We shall study a projection of the forces on a coronal plane, then on a sagittal plane, and finally on a horizontal plane.
极小量
发表于 2025-3-25 10:40:41
Korruption: Verrottung und Faszination,ee is physiological, and secondary, resulting from a change of the mechanical stress which overwhelms the resistance of otherwise normal tissues. In the primary form, with insufficient tissues of the knee, the physiological stress provokes an overall osteoarthritis attacking the femoro-tibial and th
出价
发表于 2025-3-25 11:42:32
,Öffentlichkeitskorruption im Praxistest,the outcome of the biomechanical approach to the problem statistically. It appeared that the long term results were predictable at the one-year follow-up. If they were good clinically and radiologically at one year, they usually remained good or even improved later. If they were poor at one year, th
填料
发表于 2025-3-25 16:21:06
https://doi.org/10.1007/978-3-322-81310-7t of the lower legs and feet. But the knee is under much more stress during gait. In these conditions it eccentrically bears a heavier mass: the body minus only the supporting lower leg and foot. Furthermore, the displacements of the body segments through space provoke forces of inertia which are ad
ENDOW
发表于 2025-3-25 23:44:43
https://doi.org/10.1007/978-3-663-02638-9ll then be measured. When the load and the weight-bearing surfaces are known, the magnitude of the compressive stresses in the joint can be deduced. These calculations will be preceded by an introductory discussion of load and stress.
Banquet
发表于 2025-3-26 03:20:58
https://doi.org/10.1007/978-3-663-16274-2must first undertake a geometrical analysis of the forces acting on the joint. We shall study a projection of the forces on a coronal plane, then on a sagittal plane, and finally on a horizontal plane.
Semblance
发表于 2025-3-26 07:56:53
Mechanics of the Knee,ll then be measured. When the load and the weight-bearing surfaces are known, the magnitude of the compressive stresses in the joint can be deduced. These calculations will be preceded by an introductory discussion of load and stress.
遗留之物
发表于 2025-3-26 10:45:58
The Pathomechanics of Osteoarthritis of the Knee,must first undertake a geometrical analysis of the forces acting on the joint. We shall study a projection of the forces on a coronal plane, then on a sagittal plane, and finally on a horizontal plane.
Suppository
发表于 2025-3-26 15:45:59
http://reply.papertrans.cn/19/1880/187963/187963_29.png
perpetual
发表于 2025-3-26 17:46:34
,Anleitung zur Benützung der Tabellen,In order to determine the mechanical stress in the knee we have used standard techniques: mathematical analysis, arthrography of anatomical specimens, analysis of photoelastic models and clinical and radiological examination of patients. Computerized axial tomography and arthroscopy were also employed, but on a minor scale.