Deduct
发表于 2025-3-28 15:58:01
https://doi.org/10.1007/978-3-322-90552-9eshes was obtained. The obtained results showed that for most of the joints in the wrist, the spherical approximation might be a viable choice. In some of the cases, the returned radii of the spheres were unusually large, which could mean that different contact pairs, such as the sphere-plane type might be more accurate.
现存
发表于 2025-3-28 19:34:04
http://reply.papertrans.cn/19/1880/187937/187937_42.png
fabricate
发表于 2025-3-28 23:41:05
http://reply.papertrans.cn/19/1880/187937/187937_43.png
Nuance
发表于 2025-3-29 05:48:56
Koordination dynamischer Planungssystemehe perspective of their participation in the orthosis’s essential therapeutic application, was carried out. Methods for mechanical optimization of the brace’s design can be proposed based on the results obtained. As the conducted analysis is universal in character, it can be adapted to other types of orthopedic braces.
异常
发表于 2025-3-29 11:11:30
Numerical Determination of the Degree of Mechanical Anisotropy of the Femoral Neck Trabecular Bone,esents the procedure of calibrating the numerical model in terms of the correct definition of the boundary conditions for analyses carried out with trabecular tissue samples cut at rotated coordinate system.
FACET
发表于 2025-3-29 12:12:16
Numerical Analysis of Scoliosis Brace,he perspective of their participation in the orthosis’s essential therapeutic application, was carried out. Methods for mechanical optimization of the brace’s design can be proposed based on the results obtained. As the conducted analysis is universal in character, it can be adapted to other types of orthopedic braces.
消毒
发表于 2025-3-29 15:47:15
Koordination der Auftragsabwicklungtheter is removed at the last stage; (vi) the volume replacement during catheter withdrawal. The IT, catheter load speed and cumulative shear stress over the particle during the IT were found the main prognostic factors of the IVF success.
闷热
发表于 2025-3-29 22:38:33
https://doi.org/10.1007/978-3-658-43920-0or of safety, total deformation and von Mises stress analysis were used. The results show that Co-Cr implemented implants produce the highest factor of safety. When Al-Zi combined with PLA, it produced least deformation and reasonable von- Mises stress values. PLA might perform best when used with A
使增至最大
发表于 2025-3-30 02:19:48
Koordination dynamischer Planungssysteme equivalent strain of 0.004, with total deformation of 0.24 mm and frictional stress of 0.362 MPa producing best values for trapezoidal cross-sectioned design. The findings of this study provided an insight into the selection of appropriate hip implant design with certain geometric design parameters
Mingle
发表于 2025-3-30 06:15:41
https://doi.org/10.1007/978-3-322-90552-9ritical part taken for the study purposes is a human head – respectively rear part of a human head with a theoretically insignificant skin thickness. The blunt injury potential (when an unsecured object interacts with a human head) is calculated through Head Injury Criterion (HIC) and Blunt Criterio