健忘症
发表于 2025-3-25 05:50:01
http://reply.papertrans.cn/19/1870/186994/186994_21.png
COKE
发表于 2025-3-25 09:21:02
http://reply.papertrans.cn/19/1870/186994/186994_22.png
赌博
发表于 2025-3-25 14:28:36
Köhler/Rögnitz Maschinenteile 1esented to design an active system. Further, the mass flow rate of the slurry . for an active N-flat plate collector integrated biogas (N-FPCIB) plant has been optimised for the winter season that is for the months of October to February for Srinagar, Kashmir (India) location by using IMD, Pune data
ostrish
发表于 2025-3-25 18:47:30
http://reply.papertrans.cn/19/1870/186994/186994_24.png
expunge
发表于 2025-3-25 22:53:34
http://reply.papertrans.cn/19/1870/186994/186994_25.png
Harpoon
发表于 2025-3-26 00:50:26
https://doi.org/10.1007/978-3-8351-9122-8d a substitute of gasoline could also be produced from lignocellulosic biomass has significant importance for India. Because in India, more than half of the geographical area is under agricultural cultivation, and nearly 22% area is covered with forest. It is the biomass inventory for supply of feed
细查
发表于 2025-3-26 07:56:36
http://reply.papertrans.cn/19/1870/186994/186994_27.png
deactivate
发表于 2025-3-26 10:36:56
Köhler/Rögnitz Maschinenteile 1ion of solid waste biomass is a matured technology for environmental protection and waste management. The end products are biogas (a mixture of methane and carbon dioxide), which is a useful, renewable energy source and organic manure slurry which can be used as fertilizer for agricultural purposes.
prick-test
发表于 2025-3-26 16:16:38
Köhler/Rögnitz Maschinenteile 2, cotton stalk, groundnut shell, cotton, sugarcane (bagasse). In Combustion process, the yield of gaseous product is around 50%, which can be utilized for combined heat and power production. In the combustion process, drawbacks are discussed and specified. It was observed that suitable combustor can
Antioxidant
发表于 2025-3-26 19:57:54
https://doi.org/10.1007/978-3-8351-9235-5 algorithm is used to obtain velocity and pressure at each computational cell. The flow within the combustion chamber is simulated using the k-ξ-f turbulence model. Extended coherent flame model-3 zone (ECFM3Z) is employed to carry out combustion analysis. In-cylinder fuel injection is studied using