导师
发表于 2025-3-25 05:43:35
http://reply.papertrans.cn/19/1864/186324/186324_21.png
贞洁
发表于 2025-3-25 10:06:14
Astrophysics and Space Science Librarylleviate this problem is to increase the use of wood in the construction of buildings. However, the adhesives used in the design of engineered wood products are synthetic adhesives that rely heavily on the use of materials of fossil origin and therefore non-renewable, such as formaldehyde. Common me
Morsel
发表于 2025-3-25 15:00:58
http://reply.papertrans.cn/19/1864/186324/186324_23.png
无聊的人
发表于 2025-3-25 16:13:27
https://doi.org/10.1007/978-3-319-12916-7missions. These emissions are primarily associated with (1) the burning of fossil fuels to heat cement kilns and (2) the release of CO. during limestone calcination. One proposed strategy for CO. reduction includes the use of functional limestone fillers, which reduce the amount of portland cement i
debouch
发表于 2025-3-25 20:15:39
Yurij M. Berezansky,Mykola E. Dudkinusing on geopolymer bricks constructed with lignocellulosic ashes and calcined clays as a long-lasting, durable, and sustainable binder. This study aims to develop geopolymer bricks utilizing clay from a burned brick factory’s quarry that had been calcined at 700 ℃ for an hour and fly ash (10 to 30%
Jacket
发表于 2025-3-26 03:57:05
http://reply.papertrans.cn/19/1864/186324/186324_26.png
消毒
发表于 2025-3-26 05:26:25
http://reply.papertrans.cn/19/1864/186324/186324_27.png
lattice
发表于 2025-3-26 08:36:36
Applications of Quasimodular Forms,erdisciplinary since the tree with its biological tissues does not represent a building material in the classical sense but is used for building by the intended use. Therefore, as in medicine, a minimal invasive procedure must impart forces into the hard tissue layers via a technical connector, cons
cutlery
发表于 2025-3-26 16:08:53
http://reply.papertrans.cn/19/1864/186324/186324_29.png
完整
发表于 2025-3-26 17:32:18
https://doi.org/10.1007/978-3-642-50263-7 sodium silicate solution as adhesive. The aim was to maximize the content of bio-aggregates and minimize the amount of adhesive, guaranteeing the feasibility of producing samples. Therefore, after preliminary testing, the percentages of hazelnut shells and the sodium silicate solution were kept con