Flinch
发表于 2025-3-23 10:27:44
A Crash Course in Python,vide a hands-on experience to help you get past the most difficult part of learning robotics: being intimidated by the technology. I’m going to teach you some of the basics of robotics the same way that I learned how to swim—by being thrown into the deep end while someone more experienced watches over to make sure that you don’t drown.
Phagocytes
发表于 2025-3-23 15:25:49
Raspberry Pi GPIO,d it for your use, and set up remote access so that you can program the Pi without connecting a keyboard, mouse, and monitor directly to it. You learned the basic structure of a Python program, syntax, and enough about the language to start writing programs.
驳船
发表于 2025-3-23 18:34:10
Working with Infrared Sensors,robot. You’ve worked with motors, sensors, and communication between the Raspberry Pi and the Arduino. In Chapters . and ., you learned to work with ultrasonic rangefinders using both Python and Arduino. The remainder of the book introduces new sensors, processing algorithms, and computer vision.
保守党
发表于 2025-3-24 00:09:05
Raphaël Dupuis,Frank Meyer,Rémy WillingerIn Chapter ., we used the GPIO pins on the Raspberry Pi to interact with an LED and an ultrasonic sensor. Many times, this is enough to do what you want to do. However, I also discussed some of the shortcomings of the Raspberry Pi GPIO and the likely need to expand the capabilities of the Pi in order to overcome these shortcomings.
Corporeal
发表于 2025-3-24 03:24:47
D. Rockwell,M. Ozgoren,N. SaelimIn Chapter ., we used the Raspberry Pi’s GPIO pins to control an LED and to receive information from an ultrasonic sensor. In Chapter ., we looked at the Arduino and discussed why it is a better option for general GPIO functions. We connected the ultrasonic rangefinder and an LED to the Arduino and learned how to pass data between the two boards.
Conflict
发表于 2025-3-24 09:05:59
http://reply.papertrans.cn/19/1826/182512/182512_16.png
没花的是打扰
发表于 2025-3-24 13:22:48
Quentin Docquier,Olivier Brüls,Paul FisetteWe’ve come a long way since the first chapters introducing the Raspberry Pi. At this point, you have learned about the Pi and the Arduino. You’ve learned how to program both boards. You’ve worked with sensors and motors. You’ve built your robot and programmed it to roam around and to follow a line.
碌碌之人
发表于 2025-3-24 18:40:05
https://doi.org/10.1007/978-94-011-5778-0You’ve come a long way since Chapter .. If you were new to robotics and programming, then this was probably a challenging book. It was intended to be, so congratulations on making it through. Hopefully, you followed along and built your own robot in the process.
好忠告人
发表于 2025-3-24 20:45:43
http://reply.papertrans.cn/19/1826/182512/182512_19.png
ABYSS
发表于 2025-3-25 00:38:26
Driving Motors,In Chapter ., we used the Raspberry Pi’s GPIO pins to control an LED and to receive information from an ultrasonic sensor. In Chapter ., we looked at the Arduino and discussed why it is a better option for general GPIO functions. We connected the ultrasonic rangefinder and an LED to the Arduino and learned how to pass data between the two boards.