钝剑
发表于 2025-3-25 03:41:54
Value-Added Networks and the Use of AgentsIn cutting and abrasive processes, the cutting edge penetrates into the workpiece material, which is thus plastically deformed and slides off along the rake face of the cutting edge.
万灵丹
发表于 2025-3-25 09:42:35
http://reply.papertrans.cn/19/1813/181248/181248_22.png
Evacuate
发表于 2025-3-25 15:08:17
Low Earth Orbit Satellite Radio NetworksKnowledge of the forces and power involved in cutting and abrasive processes is essential for the design of machine tools, tools, clamping devices and the process in general. Therefore, several approaches have been developed to predict these process parameters.
choleretic
发表于 2025-3-25 18:13:29
https://doi.org/10.1007/978-1-349-14175-3Mechanical energy is introduced to the cutting process.
强制性
发表于 2025-3-25 20:54:59
https://doi.org/10.1007/978-3-642-10784-9Cutting tools wear during operation. Typical wear forms develop at the cutting wedge. These wear phenomena depend on the materials of tool and workpiece and on the cutting conditions. The mechanisms of wear (also called wear causes) have to be distinguished from the wear forms. Thus, the following chain of effects results.
马具
发表于 2025-3-26 00:17:13
http://reply.papertrans.cn/19/1813/181248/181248_26.png
袖章
发表于 2025-3-26 04:35:40
High-Performance Scientific ComputingCutting at high speeds has gained great importance in recent years after the technical prerequisites were met by cutting materials, main spindles of machines, feed drives and control.
Reclaim
发表于 2025-3-26 09:07:43
http://reply.papertrans.cn/19/1813/181248/181248_28.png
指耕作
发表于 2025-3-26 14:18:56
Andrey A. Puretskiy,Michael W. BerryBroaching is a productive cutting process of serial production. Functional surfaces of high surface quality at a high dimension and form accuracy can be generated by a single tool stroke. The process is characterised by a high material removal rate.
conflate
发表于 2025-3-26 20:26:16
http://reply.papertrans.cn/19/1813/181248/181248_30.png