pericardium
发表于 2025-3-25 07:02:08
http://reply.papertrans.cn/17/1678/167713/167713_21.png
因无茶而冷淡
发表于 2025-3-25 08:09:47
AFPM Machines Without Stator Cores,ated eddy current and hysteresis core losses. Because of the absence of core losses, a coreless stator AFPM machine can operate at higher efficiency than conventional machines. On the other hand, owing to the increased nonmagnetic air gap, such a machine uses more PM material than an equivalent machine with a ferromagnetic stator core.
经典
发表于 2025-3-25 14:42:53
http://reply.papertrans.cn/17/1678/167713/167713_23.png
entail
发表于 2025-3-25 17:38:24
http://reply.papertrans.cn/17/1678/167713/167713_24.png
lattice
发表于 2025-3-25 23:11:14
http://reply.papertrans.cn/17/1678/167713/167713_25.png
饥荒
发表于 2025-3-26 03:50:04
http://reply.papertrans.cn/17/1678/167713/167713_26.png
recede
发表于 2025-3-26 06:31:49
https://doi.org/10.1007/978-3-642-82058-8Chapter 2 for the performance calculations will be developed further and adjusted to the construction of AFPM machines with ferromagnetic cores. Application of the FEM analysis to performance calculations is also emphasized.
控制
发表于 2025-3-26 08:38:00
nt Magnet (AFPM) brushless machines are modern electrical machines with a lot of advantages over their conventional counterparts. They are being increasingly used in consumer electronics, public life, instrumentation and automation system, clinical engineering, industrial electromechanical drives, a
单片眼镜
发表于 2025-3-26 14:15:37
Materials and Fabrication,e in any direction in the plane of the sheet or ribbon. A secondary recrystallization process is not needed and high temperature annealing is not essential. Nonoriented grades contain between 0.5% and 3.25% Si with up to 0.5% Al addition to increase the resistivity and lower the temperature of the primary recrystallization.
yohimbine
发表于 2025-3-26 18:42:36
AFPM Machines With Iron Cores,Chapter 2 for the performance calculations will be developed further and adjusted to the construction of AFPM machines with ferromagnetic cores. Application of the FEM analysis to performance calculations is also emphasized.