gerontocracy
发表于 2025-3-26 21:53:20
http://reply.papertrans.cn/17/1674/167322/167322_31.png
CT-angiography
发表于 2025-3-27 01:31:28
http://reply.papertrans.cn/17/1674/167322/167322_32.png
真
发表于 2025-3-27 08:11:58
,E-Seal in a Typical Convergent–Divergent (CD) Nozzle for a Liquid Engine,lity of erosion of throat. An e-seal is worked out to prevent such scenario. Its configuration, thermo-structural analysis, load distribution through grooves at throat back wall, and its overall effect on the scheme are exhibited in this article.
爱哭
发表于 2025-3-27 13:28:01
https://doi.org/10.1007/978-3-8349-9964-1ch no., and propulsion efficiency, shedding light on optimal design parameters for aerospace applications. This research contributes valuable insights to the ongoing advancement of propulsion technology, with implications for more fuel-efficient and versatile rocket systems in future.
miniature
发表于 2025-3-27 13:35:41
https://doi.org/10.1007/978-3-8349-9964-1culates. The results show that with constant pressure charging, 28%, and constant flow rate charging (for circulating flow), 5.5 times more methane concentration is found with the helical reactor configuration than with the cylindrical reactor of the same height and internal volume.
铁砧
发表于 2025-3-27 21:23:04
Flow Characteristics Study on Aerospike Nozzle for Varying Lengths Using CFD Method,ch no., and propulsion efficiency, shedding light on optimal design parameters for aerospace applications. This research contributes valuable insights to the ongoing advancement of propulsion technology, with implications for more fuel-efficient and versatile rocket systems in future.
Throttle
发表于 2025-3-27 23:04:16
Performance Analysis of a Helical Reactor Configuration for Adsorbed Natural Gas Storage,culates. The results show that with constant pressure charging, 28%, and constant flow rate charging (for circulating flow), 5.5 times more methane concentration is found with the helical reactor configuration than with the cylindrical reactor of the same height and internal volume.
打击
发表于 2025-3-28 02:16:01
http://reply.papertrans.cn/17/1674/167322/167322_38.png
ineptitude
发表于 2025-3-28 07:12:17
A Comparative Study of Various Diffuser Configurations on an Ahmed Body for Improved Aerodynamic Pemodel the geometries, after which Ansys Fluent 2021 .2 was used for computational fluid dynamics (CFD) simulations. The base model for reference is an inverted Ahmed body with two vertical endplates attached to the rear of it. Several designs of diffusers were made and simulated on the Ahmed body, a
misanthrope
发表于 2025-3-28 11:39:47
Computational Study on Heat Transfer and Fluid Flow Aspects of Adsorption-Based CO2 Capture,saturation of the adsorbent bed. The same is attained when gas inlet temperatures are high and the curve attains unity faster than lower inlet temperature beds. For all the computational purposes, COMSOL multiphysics software is used.