令人悲伤
发表于 2025-3-28 17:15:19
Detection of Inclusions in Mild Steel Using Digitized Frequency Modulated Thermal Wave Imaging,MTWI modality using the advantages of pulse compression favorable data processing approaches. Further, to evaluate the suggested scheme‘s capabilities for the detection and characterization of subsurface anomalies, it has been implemented over mild steel samples with inclusions.
无法解释
发表于 2025-3-28 19:21:53
Industrial X-ray Tomographic Imaging Application of Simultaneous Reconstruction Technique Using GPUuadro P4000 1.2 GHz GPU and time reduction of about 25× has been achieved for GPU-SIRT implementation. Experimental results on image quality and performance of GPU-SIRT for the specific industrial specimen are also presented.
medium
发表于 2025-3-29 02:18:22
Entscheidungsunterstützungssysteme the essential components of a blast furnace, which transmits preheated air into the blast furnace through the tuyere. During the combustion process in the blast furnace, blowpipes deliver a hot blast of air at 1200 °C and 4 atm. pressure inside the blast furnace. There is a possibility of erosion o
Essential
发表于 2025-3-29 05:11:17
Anwendungssysteme in Unternehmends and delamination of the composite skin sheets of honeycomb-composite sandwich panels. This paper presents an innovative use of the in-house system wherein thin inclusions have been identified in the skin sheets of honeycomb-composite panels. The quality and reliability of defect identification wi
高深莫测
发表于 2025-3-29 08:44:05
http://reply.papertrans.cn/17/1673/167294/167294_45.png
易于
发表于 2025-3-29 15:25:21
https://doi.org/10.1007/978-3-662-46732-9ht, superior strength, and durability. These are widely used in different sectors such as automotive, aerospace, wind energy, etc., for their unique material properties as mentioned above. However, due to their layered or complex structure, it becomes very challenging to identify damages through con
Concrete
发表于 2025-3-29 15:58:44
https://doi.org/10.1007/978-3-662-46732-9f the chip inductor is modeled using finite element method (FEM)-based numerical simulation. Commercially available chip inductors were modeled in MAXWELL, Ansys simulation software and the permeability (.) of the ferrite core and number of turns in the coil (.) were estimated using parametric sweep
BRACE
发表于 2025-3-29 22:20:21
https://doi.org/10.1007/978-3-662-46732-9re generated in a non-contact way using low-cost, low-frequency (40 kHz), resonant air-coupled transducers (ACTs). Elastic wave sensing is based on scanning laser vibrometry which allows to perform full non-contact damage assessment process. The authors investigated a glass fiber reinforced polymer
spinal-stenosis
发表于 2025-3-30 01:36:16
Peter Mertens,Freimut Bodendorf,Thomas Hesshy is a novel non-destructive testing (NDT) modality that has advanced rapidly in recent years in comparison to conventional NDT methods. Out of various infrared thermography modalities, recently introduced digitized frequency modulated thermal wave imaging (DFMTWI) has emerged as a more prominent a
Extemporize
发表于 2025-3-30 06:33:07
http://reply.papertrans.cn/17/1673/167294/167294_50.png