雄辩
发表于 2025-3-28 18:28:47
Zusammenfassende Berechnung der Traglagerer Aided Design (CAD), several methods are proposed for the tolerancing of mechanical products considering different type of defects such as dimensional and geometrical errors. However, form defects are neglected or modeled using complex theoretical approaches during the evaluation of the realistic
Inkling
发表于 2025-3-28 20:13:06
Der zulässige Flächendruck bei Traglagerncations play a vital role in facilitating subsequent tasks such as automatic process planning, manufacturing, inspection, and assembly. Within a Computer-Aided Design (CAD) system, assembly models consist of components with mating relations, and each component comprises geometric features. In a hier
Intruder
发表于 2025-3-29 01:49:56
Der Schmiervorgang bei umlaufenden Zapfens. The approaches of specifying tolerances on mechanical products has progressively evolved over the last decades. In conventional design practice, dimensional tolerance was applied where; permissible variation limits were simply assigned to dimensions regarded as sufficient for form and function. T
顾客
发表于 2025-3-29 06:42:20
http://reply.papertrans.cn/17/1673/167288/167288_44.png
表否定
发表于 2025-3-29 10:49:38
http://reply.papertrans.cn/17/1673/167288/167288_45.png
哑剧
发表于 2025-3-29 13:13:19
https://doi.org/10.1007/978-3-662-41206-0During the welding process, thermal cycling causes a non-uniform heating and cooling of the welded specimen, which leads to the development of residual stresses in the structure and its distortion. In order to predict the residual stresses in the welded structures, a non-coupled thermomechanical mod
暂时休息
发表于 2025-3-29 18:06:04
Die Zähigkeit der Schmiermittelohnson Cook’s law of behavior, which allows taking into account the effect of the strain rate, the effect of isotropic work hardening. It allows the prediction of: (i) residual stresses, (ii) equivalent plastic strain in the sense of Von Mises and (iii) damage introduced in the surface layers. This
ECG769
发表于 2025-3-29 20:46:17
Der Schmiervorgang bei ebenen Gleitflächenplied using Fe-Safe software. The results show that for a pressure under 20.7 MPa, the pump is in its comfort zone with a number of cycles equal to 10.. However, for a pressure equal to 27.6 MPa, the number of cycles falls to 986,279 cycles according to the Morrow criterion. The Soderberg criterion
保守
发表于 2025-3-30 02:31:43
https://doi.org/10.1007/978-3-662-41206-0sure and stiffened with longitudinal beam. The method is based on the dynamic stiffness matrix, built using first-order shear deformation theory, and natural frequencies are easily calculated. The formulation of the dynamic stiffness matrix requires coupling pre stressed shell and longitudinal stiff
开玩笑
发表于 2025-3-30 05:29:12
http://reply.papertrans.cn/17/1673/167288/167288_50.png