优雅
发表于 2025-3-23 10:45:32
Comparison of the Window Louvre on the Rear (Hidden) Tilt Rod and the Centre (Visible) Tilt Rod,tudy provides a thorough comparative analysis of both variants. The choice between these arrangements is crucial to the window treatments’ appearance and usefulness. The centre tilt rod provides better visibility and user accessibility, while the rear tilt rod is hidden behind the louvres for a clea
Leisureliness
发表于 2025-3-23 14:28:04
http://reply.papertrans.cn/17/1673/167202/167202_12.png
cauda-equina
发表于 2025-3-23 19:44:32
Parametric Study on the Steady Shear Rheology of Fumed Nanosilica Colloidal Dispersions, the shear rate surpasses a critical value termed the critical shear rate. The shear thickening phenomenon is reversible, implying that shear-thickened fluids return to their low-viscosity flowable state from a high-viscosity thickened state when the shear stress is removed. This unique property of
向下
发表于 2025-3-24 00:02:05
http://reply.papertrans.cn/17/1673/167202/167202_14.png
outset
发表于 2025-3-24 04:43:26
,Machining of Ni-Based Superalloys in WEDM Process—A Review,as pulse-on time, pulse-off time, wire feed, servo voltage, current, and wire tension) on the output parameters (such as material removal rate, kerf width, and surface roughness) in WEDM process. Numerous orthogonal arrays offer to decrease the experimental run number, and to analyse the effects of
金桌活画面
发表于 2025-3-24 10:22:49
Kinetics and Mechanisms of Reactions Involved in In-Situ Aluminum-Based Metal Matrix Composites Reiical calculations based on the Wilson and extended Miedema models, the paper explores how various phases evolve throughout the composite fabrication process. By employing these models, ΔG, the excess free energies of the various phases developed in the aluminum melt are determined exploring the effe
种属关系
发表于 2025-3-24 12:02:17
Efficient Sr-TiO3 Nanoparticle-Based Resistive n-Butanol Sensor: Effects of Composite Materials,low temperature hydrothermal technique at controlled pressure. Crystallinity of the grown film was obtained through X-ray diffraction (XRD) analysis and is found to be ~24 nm. Formation of nanoparticles was confirmed through the field-emission scanning electron microscopy (FESEM). The presence of st
轻而薄
发表于 2025-3-24 15:16:48
Maximizing Weld Quality in Al-2024 Alloy Laser Welding: A Multi-Objective Artificial Bee Colony Alg traditional welding. Al-2024, a light metal alloy finds widespread use in spacecraft, automobile, marine, and aviation industries for its excellent strength-to-weight ratio. But it has very poor weldability for its physical and thermal characteristics, and for this needs special attention while wel
Locale
发表于 2025-3-24 19:07:40
Optimizing Waste Heat Recovery in the Post-combustion Chamber of a Sponge Iron Plant,1223 K) contain unused carbon monoxide (CO) and unburnt coal, along with other components. Since carbon and CO cannot be released into the atmosphere, these are combusted by adding air into the PCC, and if gases are overheated, they are cooled by water to the required temperature. The PCC’s output f
sebaceous-gland
发表于 2025-3-25 01:41:09
http://reply.papertrans.cn/17/1673/167202/167202_20.png