acquisition
发表于 2025-4-1 03:02:21
http://reply.papertrans.cn/17/1673/167201/167201_61.png
钩针织物
发表于 2025-4-1 06:02:47
http://reply.papertrans.cn/17/1673/167201/167201_62.png
pellagra
发表于 2025-4-1 10:18:35
http://reply.papertrans.cn/17/1673/167201/167201_63.png
愉快吗
发表于 2025-4-1 18:13:19
Analysis of a Hybrid Composite Material for a Relation Between Ply Angle, Strength and Fibre Volume conducted using ASTM standards and the results for the same helped establish the relation between ply angles, volume fraction and strength of a composite material. Major changes were observed in mechanical properties of composite material laminates due to interplay of parameters like ply angle, vol
他去就结束
发表于 2025-4-1 22:09:03
Investigating Microwave Joining as a Solution for Metal Plate/Pipe Connections: A Critical Analysis the micro-tensile test, and microstructural analysis will be utilized to evaluate the quality and joint properties. Researchers can choose materials and interfaces with the aid of the current review study with required characterization and exposure time.
PLE
发表于 2025-4-2 00:01:46
http://reply.papertrans.cn/17/1673/167201/167201_66.png
颠簸下上
发表于 2025-4-2 06:16:23
Optimizing Waste Heat Recovery in the Post-combustion Chamber of a Sponge Iron Plant,gy balance, mass transfer, and heat transfer calculations. These calculations are described in the present work along with the predicted values of air and water to be added to PCC. This study employs a simple genetic algorithm (SGA) to determine the appropriate air and water levels for PCC continuou
dapper
发表于 2025-4-2 10:44:01
Design and Fabrication of Tool Changer Using Geneva Mechanism, widely used mechanism for tool changing due to its simplicity, reliability, and ease of maintenance. In this paper, a tool changer mechanism using the Geneva mechanism is designed and prototyped. The prototype was fabricated using a CO. laser cutter and a 3D printing machine, while pins and bushes
LEERY
发表于 2025-4-2 12:56:42
Experimental Investigation of Hydrogen Assisted Cracking in Micro Alloyed High Strength Line Pipe SX80), with the aim of understanding the negative impact of corrosion affecting the physical and mechanical characteristics of API5LX80 steel. Initially, fracture and failure analyses were performed on various sections of the API5LX80 steel, including the base material, heat-affected zone, and weld.